[asterisk-users] PRI DEBUG

[Yves A.]

thanks, that command syntax works.

yves

Am 11.04.2013 18:51, schrieb Richard Mudgett:
>
> ----- Original Message -----
>> hi,
>>
>> strange behaviour while trying to use pri debugging on asterisk 11.x
>> ...
>>
>> please take a look:
>>
>> bas1104*CLI> pri show version
>> libpri version: 1.4.13
>> bas1104*CLI> dahdi show version
>> DAHDI Version: 2.6.1 Echo Canceller: HWEC
>> bas1104*CLI> help pri
>> pri intense debug span <no description available>
>> pri service disable channel Remove a channel from service
>> pri service enable channel Return a channel to service
>> pri set debug {on|off |hex|inte Enables PRI debugging on a span
>> pri set debug file Sends PRI debug output to the specified file
>> pri show channels Displays PRI channel information
>> pri show debug Displays current PRI debug settings
>> pri show spans Displays PRI span information
>> pri show span Displays PRI span information
>> pri show version Displays libpri version
>> bas1104*CLI> help dahdi
>> dahdi destroy channel Destroy a channel
>> dahdi restart Fully restart DAHDI channels
>> dahdi set dnd Sets/resets DND (Do Not Disturb) mode on a channel
>> dahdi set hwgain Set hardware gain on a channel
>> dahdi set swgain Set software gain on a channel
>> dahdi show cadences List cadences
>> dahdi show channels [group|con Show active DAHDI channels
>> dahdi show channel Show information on a channel
>> dahdi show status Show all DAHDI cards status
>> dahdi show version Show the DAHDI version in use
>>
>> currently all debug off:
>>
>> bas1104*CLI> pri show debug
>> Span 1: Debug: No Intense: No
>> Span 2: Debug: No Intense: No
>> Span 3: Debug: No Intense: No
>> Span 4: Debug: No Intense: No
>>
>> switching it on (which currently works as expected)
>>
>>
>> bas1104*CLI> pri intense debug span 1
>> Enabled debugging on span 1
>>
>>
>> oops, still shows no debug.... but it IS activated...
> It activated a different mode of debug than what you expected
> because that command is an alias that was not updated.
>
>> bas1104*CLI> pri show debug
>> Span 1: Debug: No Intense: No
>> Span 2: Debug: No Intense: No
>> Span 3: Debug: No Intense: No
>> Span 4: Debug: No Intense: No
>>
>> huh... how to disable it again? on some machines I can do so with
>> "pri no debug span <nr>" but not here... gives same result (no
>> such command) and debug is still enabled...
>>
>> bas1104*CLI> pri set debug off
>> No such command 'pri set debug off' (type 'core show help pri set'
>> for other possible commands)
>> bas1104*CLI>
>>
>>
>> so... whats the right way to disable pri debugging?
> The correct command is "pri set debug {on|off|intense} span x".
> The "pri intense debug span x" command is an alias for
> "pri set debug 2 span x" that didn't get updated when the real
> command was changed to "pri set debug intense span x".
>
> This will show the help you need:
> bas1104*CLI> help pri set debug off span
>
> Richard
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                 http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users
>