[asterisk-users] Asterisk 11.2.1 / dahdi destroy channel / asterisk crashes

[Yves A.]

Hi,

I can reproduce your report (11.0.1, libpri 1.4.13, dahdi 2.6.1) and 
would say it is a bug...
To remotely hang up a call use
*
**hangup request <channel>*

where channel is the exact id of your channel as you would receive it via

*core show channels*

yves

Am 11.04.2013 10:56, schrieb Thorsten Göllner:
> Hi,
>
> I have the following setup:
>
> Ubuntu 12.04.02 LTS (64 bit)
> Asterisk 11.2.1
> Sangoma 4-Port-Card (A104d) with firmware 43 (german e1-ports connected)
> WANPIPE Release: 3.5.28
> DAHDI Version: 2.6.1 Echo Canceller: HWEC
> libpri version: 1.4.12
>
> I call via sip into the dialplan. Then I do a 
> "Dial(DAHDI/g1/voicenumber,r)". The call is bridged and everything is 
> fine. "dahdi show channels" shows me, that channel 1 is used for the 
> outcall. Then I try to hangup the outcall via "dahdi destroy channel 
> 1". Asterisk crahes immediatly. No message is logged (verbose is 10 
> and debug is 10).
>
> I get disconnected from the atserisk cli at this moment:
>
> vlr-3*CLI> dahdi destroy channel 1
> vlr-3*CLI>
> Disconnected from Asterisk server
> Asterisk cleanly ending (0).
> Executing last minute cleanups
> voxi at vlr-3:/tmp$
>
> Is this a bug or is this my fault?
>
> Best regards
> -Thorsten-
>
> -- 
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130411/405fd76f/attachment.htm>