[asterisk-users] [asterik-users] Installing PRI card

[A J Stiles]

On Friday 30 September 2011, NaJIm wrote:
> Am I getting these error messages due to wrong configurations in my
> zapata.conf.  ??
> 
> I have got the following configurations in my zapata-channels.conf.
> 
> ; Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) B8ZS/ESF RED
> group=0,11
> context=from-pstn
> switchtype = national
> signalling = pri_cpe
> channel => 1-23
> group=
> context=default

Your Bearer channels should be 1 to 15 and 17 to 31  (or as high as they go, 
depending whether or not you paid for a full set of 30 lines),  with 16 as the 
Data channel.

-- 
AJS

Answers come *after* questions.