[asterisk-users] dahdi show status command not avilable in CLI
michael k
michael at inapp.com
Fri Oct 7 08:23:37 CDT 2011
Hi,
I am getting this error message while executing the "module load
chan_dahdi.so".
astrisks*CLI> module load chan_dahdi.so
Unable to load module chan_dahdi.so
Command 'module load chan_dahdi.so' failed.
== Parsing '/etc/asterisk/chan_dahdi.conf': == Found
== Parsing '/etc/asterisk/chan_dahdi_general.conf': == Found
== Parsing '/etc/asterisk/chan_dahdi_groups.conf': == Found
== Parsing '/etc/asterisk/dahdi-channels.conf': == Found
== Parsing '/etc/asterisk/chan_dahdi_additional.conf': == Found
Thanks,
Michael.k
On Thu, Oct 6, 2011 at 9:44 PM, Eric Wieling <EWieling at nyigc.com> wrote:
> What happens when you do the module load chan_dahdi.so command?
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] On Behalf Of michael k
> Sent: Thursday, October 06, 2011 12:10 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] dahdi show status command not avilable in CLI
>
> Hi,
>
>
> astrisks*CLI> module unload chan_dahdi.so
>
> Unable to unload resource chan_dahdi.so
> Command 'module unload chan_dahdi.so ' failed.
>
> Producing some other error messages !!!!!
>
>
> On Thu, Oct 6, 2011 at 9:17 PM, Eric Wieling <EWieling at nyigc.com> wrote:
>
>
> In the Asterisk CLI run the commands "module unload chan_dahdi.so"
> and "module load chan_dahdi.so".
>
>
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] On Behalf Of michael k
> Sent: Thursday, October 06, 2011 11:40 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] dahdi show status command not avilable
> in CLI
>
> Hi,
>
> I was run the commands "dahdi_genconf" and dahdi_cfg outside
> the CLI as the part of x100p card installation. Before issuing this command
> the dahdi show status command was available. There may any issues ?
>
>
> Michael.k
>
>
>
> On Thu, Oct 6, 2011 at 8:59 PM, gincantalupo <
> gincantalupo at fgasoftware.com> wrote:
>
>
>
> Hi Michael,
>
> what if you reload the module chan_dahdi from within the *
> CLI? It should give some hints.....
>
> Giorgio
>
>
>
> On 10/06/2011 05:22 PM, michael k wrote:
>
> Hi Giorgio,
>
> Thanks for your reply. I will produce some output for
> your reference.
>
> # lsmod | grep dahdi
>
> dahdi_echocan_mg2 39688 1
> dahdi_transcode 42372 1 wctc4xxp
> dahdi_voicebus 79424 2 wctdm24xxp,wcte12xp
> dahdi 238384 14
> dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp
> crc_ccitt 35265 2 wctdm24xxp,dahdi
>
>
> # service dahdi status
>
> ### Span 1: WCFXO/0 "Wildcard X100P Board 1"
> (MASTER)
> 1 FXO FXSKS (SWEC: MG2) (battery)
>
>
> # dahdi_cfg -vv
>
> DAHDI Tools Version - 2.3.0
>
> DAHDI Version: 2.3.0.1
> Echo Canceller(s): MG2
> Configuration
> ======================
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Echo Canceler:
> mg2) (Slaves: 01)
>
> 1 channels to configure.
>
> Setting echocan for channel 1 to mg2
>
>
> # dahdi_scan
>
> [1]
> active=yes
> alarms=OK
> description=Wildcard X100P Board 1
> name=WCFXO/0
> manufacturer=Digium
> devicetype=Wildcard X100P
> location=PCI Bus 02 Slot 02
> basechan=1
> totchans=1
> irq=193
> type=analog
> port=1,FXO
>
>
> These outputs shows that the modules are loaded
> correctly. Any other clues ?
>
> Michael.k
>
>
>
> On Thu, Oct 6, 2011 at 8:43 PM, gincantalupo <
> gincantalupo at fgasoftware.com> wrote:
>
>
> Hi Michael,
>
> if you type "dah" followed by TAB and nothing
> appears, it means you do not have dahdi module loaded or dahdi_cfg
> application not launched before starting asterisk.
>
> Giorgio
>
>
> On 10/06/2011 04:57 PM, michael k wrote:
>
> Hi All,
>
> I have installed asteriskNow with
> Asterisk 1.6.2.11 and FreePBX 2.7.0.10. I have configured x100p fxo card in
> my asterisk box. But in my cli mode i am not getting the command "dahdi
> show status"
>
>
> Output of CLI :
>
> astrisks*CLI> dahdi show status
> No such command 'dahdi show status'
> (type 'core show help dahdi show' for other possible commands)
>
>
> I really not understand why this
> command is not avilable in CLI mode. Please help me to resolve this issue
>
>
> Michael.k
>
>
> --
>
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided
> by http://www.api-digital.com --
> New to Asterisk? Join us for a live
> introductory webinar every Thurs:
>
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options
> visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
>
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by
> http://www.api-digital.com --
> New to Asterisk? Join us for a live
> introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
>
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by
> http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory
> webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
>
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by
> http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar
> every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
>
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com--
> New to Asterisk? Join us for a live introductory webinar every
> Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111007/d3d4cafe/attachment.htm>
More information about the asterisk-users
mailing list