[asterisk-users] dahdi show status command not avilable in CLI

[michael k]

Hi,

      I was run the commands *"dahdi_genconf"* and *dahdi_cfg* outside the
CLI as the part of x100p card installation. Before issuing this command the
*dahdi show status *command was available. There may any issues ?


Michael.k


On Thu, Oct 6, 2011 at 8:59 PM, gincantalupo
<gincantalupo at fgasoftware.com>wrote:

> **
> Hi Michael,
>
> what if you reload the module chan_dahdi from within the * CLI? It should
> give some hints.....
>
> Giorgio
>
>
>
> On 10/06/2011 05:22 PM, michael k wrote:
>
> Hi Giorgio,
>
> Thanks for your reply. I will produce some output for your reference.
>
> *# lsmod | grep dahdi*
>
> dahdi_echocan_mg2      39688  1
> dahdi_transcode        42372  1 wctc4xxp
> dahdi_voicebus         79424  2 wctdm24xxp,wcte12xp
> dahdi                 238384  14
> dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp
> crc_ccitt              35265  2 wctdm24xxp,dahdi
>
>
> *# service dahdi status*
>
> ### Span  1: WCFXO/0 "Wildcard X100P Board 1" (MASTER)
>   1 FXO        FXSKS       (SWEC: MG2) (battery)
>
>
> *# dahdi_cfg -vv*
>
> DAHDI Tools Version - 2.3.0
>
> DAHDI Version: 2.3.0.1
> Echo Canceller(s): MG2
> Configuration
> ======================
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
>
> 1 channels to configure.
>
> Setting echocan for channel 1 to mg2
>
> *
> # dahdi_scan *
>
> [1]
> active=yes
> alarms=OK
> description=Wildcard X100P Board 1
> name=WCFXO/0
> manufacturer=Digium
> devicetype=Wildcard X100P
> location=PCI Bus 02 Slot 02
> basechan=1
> totchans=1
> irq=193
> type=analog
> port=1,FXO
>
>
> These outputs shows that the modules are loaded correctly. Any other clues
> ?
>
> Michael.k
>
>
> On Thu, Oct 6, 2011 at 8:43 PM, gincantalupo <gincantalupo at fgasoftware.com
> > wrote:
>
>>  Hi Michael,
>>
>> if you type "dah" followed by TAB and nothing appears, it means you do not
>> have dahdi module loaded or dahdi_cfg application not launched before
>> starting asterisk.
>>
>> Giorgio
>>
>>
>> On 10/06/2011 04:57 PM, michael k wrote:
>>
>>  Hi All,
>>
>>     I have installed asteriskNow with  Asterisk 1.6.2.11 and FreePBX
>> 2.7.0.10. I have configured x100p fxo card in my asterisk box.  But in my
>> cli mode i am not getting the command *"dahdi show status"*
>>
>>
>> Output of CLI :
>>
>> astrisks*CLI> *dahdi show status*
>> No such command 'dahdi show status' (type 'core show help dahdi show' for
>> other possible commands)
>>
>>
>> I really not understand why this command is not avilable in CLI mode.
>> Please help me to resolve this issue
>>
>>
>> Michael.k
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>    http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>> --
>> _____________________________________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>               http://www.asterisk.org/hello
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111006/d88a01b1/attachment.htm>