[asterisk-users] dahdi show status command not avilable in CLI

[gincantalupo]

Hi Michael,

what if you reload the module chan_dahdi from within the * CLI? It 
should give some hints.....

Giorgio


On 10/06/2011 05:22 PM, michael k wrote:
> Hi Giorgio,
>
> Thanks for your reply. I will produce some output for your reference.
>
> *# lsmod | grep dahdi*
>
> dahdi_echocan_mg2      39688  1
> dahdi_transcode        42372  1 wctc4xxp
> dahdi_voicebus         79424  2 wctdm24xxp,wcte12xp
> dahdi                 238384  14 
> dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp
> crc_ccitt              35265  2 wctdm24xxp,dahdi
>
>
> *# service dahdi status*
>
> ### Span  1: WCFXO/0 "Wildcard X100P Board 1" (MASTER)
>   1 FXO        FXSKS       (SWEC: MG2) (battery)
>
>
> *# dahdi_cfg -vv*
>
> DAHDI Tools Version - 2.3.0
>
> DAHDI Version: 2.3.0.1
> Echo Canceller(s): MG2
> Configuration
> ======================
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)
>
> 1 channels to configure.
>
> Setting echocan for channel 1 to mg2
>
> *
> # dahdi_scan *
>
> [1]
> active=yes
> alarms=OK
> description=Wildcard X100P Board 1
> name=WCFXO/0
> manufacturer=Digium
> devicetype=Wildcard X100P
> location=PCI Bus 02 Slot 02
> basechan=1
> totchans=1
> irq=193
> type=analog
> port=1,FXO
>
>
> These outputs shows that the modules are loaded correctly. Any other 
> clues ?
>
> Michael.k
>
>
> On Thu, Oct 6, 2011 at 8:43 PM, gincantalupo 
> <gincantalupo at fgasoftware.com <mailto:gincantalupo at fgasoftware.com>> 
> wrote:
>
>     Hi Michael,
>
>     if you type "dah" followed by TAB and nothing appears, it means
>     you do not have dahdi module loaded or dahdi_cfg application not
>     launched before starting asterisk.
>
>     Giorgio
>
>
>     On 10/06/2011 04:57 PM, michael k wrote:
>>     Hi All,
>>
>>         I have installed asteriskNow with  Asterisk 1.6.2.11 and
>>     FreePBX 2.7.0.10. I have configured x100p fxo card in my asterisk
>>     box.  But in my cli mode i am not getting the command *"dahdi
>>     show status"*
>>
>>
>>     Output of CLI :
>>
>>     astrisks*CLI> *dahdi show status*
>>     No such command 'dahdi show status' (type 'core show help dahdi
>>     show' for other possible commands)
>>
>>
>>     I really not understand why this command is not avilable in CLI
>>     mode. Please help me to resolve this issue
>>
>>
>>     Michael.k
>>
>>
>>     --
>>     _____________________________________________________________________
>>     -- Bandwidth and Colocation Provided byhttp://www.api-digital.com  --
>>     New to Asterisk? Join us for a live introductory webinar every Thurs:
>>                     http://www.asterisk.org/hello
>>
>>     asterisk-users mailing list
>>     To UNSUBSCRIBE or update options visit:
>>         http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>     --
>     _____________________________________________________________________
>     -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>     New to Asterisk? Join us for a live introductory webinar every Thurs:
>     http://www.asterisk.org/hello
>
>     asterisk-users mailing list
>     To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>                 http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111006/ae34f720/attachment-0001.htm>