[asterisk-users] Question about Read() application

[Kingsley Tart]

Hi,

Did you get a workaround for this? I sent you a message offlist but you
didn't reply so I don't know whether you saw it.

Cheers,
Kingsley.

On Fri, 2011-11-18 at 13:15 -0600, Danny Nicholas wrote:
> My IVR wouldn't sound right if I allowed 2 or 3 times before it was
> considered a failure.   The big(ger) problem is that it just hangs up when
> it fails, no warning or work around to do.
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Doug Lytle
> Sent: Friday, November 18, 2011 1:10 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Question about Read() application
> 
> 
> Danny Nicholas wrote:
> > The user reported to me that "I punched 1 and it hung up" - in my testing,
> I found that slow DTMF entry (1 digit every 2 seconds or so) or fast entry
> (more than 10 digits per second) was most likely to cause the problem.
> 
> I've never had mine just hangup on a mis-key, but then again I have it try 3
> times before considering it a failure.
> 
> exten => s,1,Read(get-admin-password|enter-password|||3|)
> 
> Doug
> 
>