[asterisk-users] Question about Read() application

[Danny Nicholas]

My IVR wouldn't sound right if I allowed 2 or 3 times before it was
considered a failure.   The big(ger) problem is that it just hangs up when
it fails, no warning or work around to do.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Doug Lytle
Sent: Friday, November 18, 2011 1:10 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Question about Read() application


Danny Nicholas wrote:
> The user reported to me that "I punched 1 and it hung up" - in my testing,
I found that slow DTMF entry (1 digit every 2 seconds or so) or fast entry
(more than 10 digits per second) was most likely to cause the problem.

I've never had mine just hangup on a mis-key, but then again I have it try 3
times before considering it a failure.

exten => s,1,Read(get-admin-password|enter-password|||3|)

Doug


-- 

Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety."


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users