[asterisk-users] sig_pri.c:985 pri_find_dchan: Span 1 No D-channels available! Using Primary channel as D-channel anyway!

[Satish Patel]

What company card you have? Copy paste your dahdi config and  
chan_dahdi.conf

--
Sent from my iPhone

On Jun 15, 2011, at 6:53 AM, bilal ghayyad <bilmar_gh at yahoo.com> wrote:

> Dears;
>
> The problem was related to something else.
>
> The Digium card has two PRI ports, actually to get it UP, I have to  
> configure the two ports and both of those two ports to take the  
> timing from span 1.
>
> Why this, I do not know ! Although I am using only one E1 connected  
> to span 1, so why I have to configure the other span !!
>
> After configuring the second span, so now one D channel for span 1  
> is UP and the other is down (because no E1 cable connected to the  
> other span), now I can remove the configuration for the other span  
> and the D channel for the first span will stay UP, but at anytime,  
> the E1 might come back down again and I have to configure the other  
> span port again to get the E1 up on the first span.
>
> Any advise for this?
>
> Regards
> Bilal
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>