[asterisk-users] sig_pri.c:985 pri_find_dchan: Span 1 No D-channels available! Using Primary channel as D-channel anyway!

[bilal ghayyad]

Dears;

The problem was related to something else.

The Digium card has two PRI ports, actually to get it UP, I have to configure the two ports and both of those two ports to take the timing from span 1. 

Why this, I do not know ! Although I am using only one E1 connected to span 1, so why I have to configure the other span !!

After configuring the second span, so now one D channel for span 1 is UP and the other is down (because no E1 cable connected to the other span), now I can remove the configuration for the other span and the D channel for the first span will stay UP, but at anytime, the E1 might come back down again and I have to configure the other span port again to get the E1 up on the first span.

Any advise for this?

Regards
Bilal