[asterisk-users] Calling rules

[Vitor Carlos Flausino]

> Correcting the line to:
> 
> exten =>
> _0.,1,Macro(trunkdial-failover-0.3,${trunk_1}/${,${EXTEN:1})},,trunk_1,)
> 
> problem persists...
> 
> any other suggestions?
> 
> 
> Best regards,
> What does your trunkdial-failover-0.3 look like?
> 
> 
Here goes...

[macro-trunkdial-failover-0.3]
exten = s,1,GotoIf($[${LEN(${FMCIDNUM})} > 6]?1-fmsetcid,1)
exten = s,2,GotoIf($[${LEN(${GLOBAL_OUTBOUNDCIDNAME})} > 1]?1-setgbobname,1)
exten = s,3,Set(CALLERID(num)=${IF($[${LEN(${CID_${CALLERID(num)}})} > 2]?${CID_${CALLERID(num)}}:)})
exten = s,n,GotoIf($[${LEN(${CALLERID(num)})} > 6]?1-dial,1)
exten = s,n,Set(CALLERID(all)=${IF($[${LEN(${CID_${ARG3}})} > 6]?${CID_${ARG3}}:${GLOBAL_OUTBOUNDCID})})
exten = s,n,Goto(1-dial,1)
exten = 1-setgbobname,1,Set(CALLERID(name)=${GLOBAL_OUTBOUNDCIDNAME})
exten = 1-setgbobname,n,Goto(s,3)
exten = 1-fmsetcid,1,Set(CALLERID(num)=${FMCIDNUM})
exten = 1-fmsetcid,n,Set(CALLERID(name)=${FMCIDNAME})
exten = 1-fmsetcid,n,Goto(1-dial,1)
exten = 1-dial,1,Dial(${ARG1})
exten = 1-dial,n,Gotoif(${LEN(${ARG2})} > 0 ?1-${DIALSTATUS},1:1-out,1)
exten = 1-CHANUNAVAIL,1,Dial(${ARG2})
exten = 1-CHANUNAVAIL,n,Hangup()
exten = 1-CONGESTION,1,Dial(${ARG2})
exten = 1-CONGESTION,n,Hangup()
exten = 1-out,1,Hangup()