[asterisk-users] Why **CONGESTION** not *****NOANSWER****** ?
virendra bhati
virbhati at gmail.com
Wed Dec 21 07:29:31 CST 2011
Hi Eric,
thanks not getting correct response.
But if default time is 60 then why I will declared ? It's my though and I
don't declared on dial.
On Wed, Dec 21, 2011 at 6:43 PM, Eric Wieling <EWieling at nyigc.com> wrote:
> " -- Got SIP response 480 "Temporarily Unavailable" back from
> 10.10.11.203" this is why you are getting congestion instead of NOANSWER.
> Fix that and add a timeout to your dial and it should work.
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] On Behalf Of virendra bhati
> Sent: Wednesday, December 21, 2011 6:48 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion; Sam Govind
> Subject: [asterisk-users] Why **CONGESTION** not *****NOANSWER****** ?
>
> Hi List,
>
> I have a DID number which is routed to my production server. Problem is
> that when I dial that DID number from my production number then it's gives
> DIALSTATUS to CONGESTION if I don't pick the calls. As per the asterisk it
> should reply NO ANSWER.
>
> extensions.conf :-
>
>
> exten => 08723310476,1,Dial(SIP/2218)
> same => n,NoOp(**${DIALSTATUS}**)
> same => n,ExecIf($['${DIALSTATUS}'='CHANUNAVAIL']?NoOp(Channel
> unavailable. On SIP, peer may not be registered.))
> same => n,ExecIf($['${DIALSTATUS}'='BUSY']?noop(Busy signal. The
> dial command reached its number but the number is busy.))
> same => n,ExecIf($['${DIALSTATUS}'='ANSWER']?noop(Call is answered.
> A successful dial. The caller reached the callee.))
> same => n,ExecIf($['${DIALSTATUS}'='NOANSWER']?noop(No answer. The
> dial command reached its number, the number rang for too long, then the
> dial timed out.))
> same => n,ExecIf($['${DIALSTATUS}'='CANCEL']?noop(Call is
> cancelled. The dial command reached its number but the caller hung up
> before the callee picked up.))
> same => n,ExecIf($['${DIALSTATUS}'='CONGESTION']?noop(Congestion.
> This status is usually a sign that the dialled number is not recognised.))
> same => n,ExecIf($['${DIALSTATUS}'='DONTCALL']?noop(Privacy mode,
> callee rejected the call))
> same => n,ExecIf($['${DIALSTATUS}'='TORTURE']?noop(Privacy mode,
> callee chose to send caller to torture menu))
> same => n,ExecIf($['${DIALSTATUS}'='INVALIDARGS']?noop(Error
> parsing Dial command arguments))
> same => n,wait(9)
>
> exten => 1212,1,Answer()
> same => n,Dial(SIP/08723310476 at voipon)
> same => n,NoOp(**${DIALSTATUS}**)
> same => n,ExecIf($['${DIALSTATUS}'='CHANUNAVAIL']?NoOp(Channel
> unavailable. On SIP, peer may not be registered.))
> same => n,ExecIf($['${DIALSTATUS}'='BUSY']?noop(Busy signal. The
> dial command reached its number but the number is busy.))
> same => n,ExecIf($['${DIALSTATUS}'='ANSWER']?noop(Call is answered.
> A successful dial. The caller reached the callee.))
> same => n,ExecIf($['${DIALSTATUS}'='NOANSWER']?noop(No answer. The
> dial command reached its number, the number rang for too long, then the
> dial timed out.))
> same => n,ExecIf($['${DIALSTATUS}'='CANCEL']?noop(Call is
> cancelled. The dial command reached its number but the caller hung up
> before the callee picked up.))
> same => n,ExecIf($['${DIALSTATUS}'='CONGESTION']?noop(Congestion.
> This status is usually a sign that the dialled number is not recognised.))
> same => n,ExecIf($['${DIALSTATUS}'='DONTCALL']?noop(Privacy mode,
> callee rejected the call))
> same => n,ExecIf($['${DIALSTATUS}'='TORTURE']?noop(Privacy mode,
> callee chose to send caller to torture menu))
> same => n,ExecIf($['${DIALSTATUS}'='INVALIDARGS']?noop(Error
> parsing Dial command arguments))
> same => n,Hangup()
>
> exten => h,1,NoOp()
> same => n,NoOp(********${HANGUPCAUSE}*********)
> same => n,NoOP(bye Virendra)
>
>
> asterisk cli:-
>
> -- Executing [1212 at default:1] Answer("SIP/2209-00000854", "") in new
> stack
> -- Executing [1212 at default:2] Dial("SIP/2209-00000854", "SIP/
> 08723310476 at voipon") in new stack
> == Using SIP RTP CoS mark 5
> -- Called 08723310476 at voipon
> == Using SIP RTP CoS mark 5
> -- Executing [08723310476 at default:1] Dial("SIP/77.240.54.13:5063-00000856",
> "SIP/2218") in new stack
> == Using SIP RTP CoS mark 5
> -- Called 2218
> -- SIP/2218-00000857 is ringing
> -- SIP/voipon-00000855 is making progress passing it to
> SIP/2209-00000854
> -- Got SIP response 480 "Temporarily Unavailable" back from 10.10.11.203
> -- SIP/2218-00000857 is circuit-busy
> == Everyone is busy/congested at this time (1:0/1/0)
> -- Executing [08723310476 at default:2] NoOp("SIP/77.240.54.13:5063-00000856",
> "**CONGESTION**") in new stack
> -- Executing [08723310476 at default:3] ExecIf("SIP/77.240.54.13:5063-00000856",
> "0?NoOp(Channel unavailable. On SIP, peer may not be registered.)") in new
> stack
> -- Executing [08723310476 at default:4] ExecIf("SIP/77.240.54.13:5063-00000856",
> "0?noop(Busy signal. The dial command reached its number but the number is
> busy.)") in new stack
> -- Executing [08723310476 at default:5] ExecIf("SIP/77.240.54.13:5063-00000856",
> "0?noop(Call is answered. A successful dial. The caller reached the
> callee.)") in new stack
> -- Executing [08723310476 at default:6] ExecIf("SIP/77.240.54.13:5063-00000856",
> "0?noop(No answer. The dial command reached its number, the number rang for
> too long, then the dial timed out.)") in new stack
> -- Executing [08723310476 at default:7] ExecIf("SIP/77.240.54.13:5063-00000856",
> "0?noop(Call is cancelled. The dial command reached its number but the
> caller hung up before the callee picked up.)") in new stack
> -- Executing [08723310476 at default:8] ExecIf("SIP/77.240.54.13:5063-00000856",
> "1?noop(Congestion. This status is usually a sign that the dialled number
> is not recognised.)") in new stack
> -- Executing [08723310476 at default:9] ExecIf("SIP/77.240.54.13:5063-00000856",
> "0?noop(Privacy mode, callee rejected the call)") in new stack
> -- Executing [08723310476 at default:10] ExecIf("SIP/77.240.54.13:5063-00000856",
> "0?noop(Privacy mode, callee chose to send caller to torture menu)") in new
> stack
> -- Executing [08723310476 at default:11] ExecIf("SIP/77.240.54.13:5063-00000856",
> "0?noop(Error parsing Dial command arguments)") in new stack
> -- Executing [08723310476 at default:12] Wait("SIP/77.240.54.13:5063-00000856",
> "9") in new stack
> -- Auto fallthrough, channel 'SIP/77.240.54.13:5063-00000856' status
> is 'CONGESTION'
> -- Executing [h at default:1] NoOp("SIP/77.240.54.13:5063-00000856", "")
> in new stack
> -- Executing [h at default:2] NoOp("SIP/77.240.54.13:5063-00000856",
> "********19*********") in new stack
> -- Executing [h at default:3] NoOp("SIP/77.240.54.13:5063-00000856", "bye
> Virendra") in new stack
> -- SIP/voipon-00000855 is circuit-busy
> == Everyone is busy/congested at this time (1:0/1/0)
> -- Executing [1212 at default:3] NoOp("SIP/2209-00000854",
> "**CONGESTION**") in new stack
> -- Executing [1212 at default:4] ExecIf("SIP/2209-00000854",
> "0?NoOp(Channel unavailable. On SIP, peer may not be registered.)") in new
> stack
> -- Executing [1212 at default:5] ExecIf("SIP/2209-00000854", "0?noop(Busy
> signal. The dial command reached its number but the number is busy.)") in
> new stack
> -- Executing [1212 at default:6] ExecIf("SIP/2209-00000854", "0?noop(Call
> is answered. A successful dial. The caller reached the callee.)") in new
> stack
> -- Executing [1212 at default:7] ExecIf("SIP/2209-00000854", "0?noop(No
> answer. The dial command reached its number, the number rang for too long,
> then the dial timed out.)") in new stack
> -- Executing [1212 at default:8] ExecIf("SIP/2209-00000854", "0?noop(Call
> is cancelled. The dial command reached its number but the caller hung up
> before the callee picked up.)") in new stack
> -- Executing [1212 at default:9] ExecIf("SIP/2209-00000854",
> "1?noop(Congestion. This status is usually a sign that the dialled number
> is not recognised.)") in new stack
> -- Executing [1212 at default:10] ExecIf("SIP/2209-00000854",
> "0?noop(Privacy mode, callee rejected the call)") in new stack
> -- Executing [1212 at default:11] ExecIf("SIP/2209-00000854",
> "0?noop(Privacy mode, callee chose to send caller to torture menu)") in new
> stack
> -- Executing [1212 at default:12] ExecIf("SIP/2209-00000854",
> "0?noop(Error parsing Dial command arguments)") in new stack
> -- Executing [1212 at default:13] Hangup("SIP/2209-00000854", "") in new
> stack
> == Spawn extension (default, 1212, 13) exited non-zero on
> 'SIP/2209-00000854'
> -- Executing [h at default:1] NoOp("SIP/2209-00000854", "") in new stack
> -- Executing [h at default:2] NoOp("SIP/2209-00000854",
> "********1*********") in new stack
> -- Executing [h at default:3] NoOp("SIP/2209-00000854", "bye Virendra")
> in new stack
>
>
> Even I hangup the call or answer the call and don't pick the call I always
> get the same responce at asterisk.
>
>
> --
>
>
> Thanks and regards
>
> Virendra Bhati
> +91-8885268942
> Software Engineer
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
Thanks and regards
Virendra Bhati
+91-8885268942
Software Engineer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20111221/107ddb4b/attachment-0001.htm>
More information about the asterisk-users
mailing list