[asterisk-users] Problem setting for incoming termination

[Jim Boykin]

The problem seems like asterisk is not authenticating at all. It
accept the default invite and transfer it to default contact. ANy
help.



On Thu, Aug 11, 2011 at 12:33 PM, Jim Boykin <boykinjim at gmail.com> wrote:
> Hi,
>
> We have difficulty setting up the incoming termination for our
> clients. Both the ends are using asterisk.  The problem is unless we
> use fromuser at client end, it does not work properly as expected.
>
> Below is a configuration at our end. The problem is that whenever call
> is received from the client, it goes to default context instead of
> 'dallas' context. Also, the ${CDR(accountcode)} variable remains
> empty. Now, If we set fromuser field at the client end, then
> everything starts working, however, in that case, it overrides the
> callerid.
>
> [dallas]
> type=user
> username=dallas
> secret=somepassword
> host=dynamic
> nat=no
> disallow=all
> allow=g729
> allow=ulaw
> allow=alaw
> accountcode=411
> context=dallas
>
>
> This is the configuration at client end.
>
> [outgoing]
> type=peer
> username=dallas
> secret=somepassword
> host=<ipaddress>
> nat=no
> disallow=all
> allow=g729
> allow=ulaw
> allow=alaw
>
> We do not require the client to register, neither we want them to use
> fromuser field. I think we are doing some silly mistake since this
> should be a simple configuration used by many. Please help
>
> Thanks
> Jim
>