[asterisk-users] Ring delay problem

[Warren Selby]

On Fri, Aug 5, 2011 at 7:53 AM, Alejandro Cabrera Obed <aco1967 at gmail.com>wrote:

> Dear, I have asterisk 1.6.2.13 in a small hardware PBX (512 GB RAM and
> Celeron), and last days when I call from one extension to another of the
> same PBX after I dial the number the rings sound after 20 seconds.
>
> In the CLI log, when I debug the AGI, I see always goes good until
> dialparties.agi, and after that there are 20 seconds without any log, and so
> the ring sound.
>
>
I've had this issue before.  Try moving the /etc/php.d/imap.so file out of
the /etc/php.d directory and see if that helps.  It's been a while but I may
have had to restart the machine when I did the file move.  It may have also
just been a DNS timeout issue, I don't recall the specifics.  I believe I
used this thread as a reference:
http://www.fonality.com/trixbox/forums/trixbox-forums/help/suddenly-everything-slow

-- 
Thanks,
--Warren Selby, dCAP
http://www.SelbyTech.com <http://www.selbytech.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110805/5a6e5f53/attachment.htm>