[asterisk-users] Urgent Help Required

[C F]

You see the problem is that asterisk will send as many packets as its
admin does on the list. There is no way to change that. I suggest you
first change the amount of packets per second you send.

On Thu, Nov 4, 2010 at 5:38 AM, ali anjum <aliraza_anjum at hotmail.com> wrote:
> Hi,
>
> (I have install trixbox2.8 with asterisk 1.6)
> I am using speex codec for my Inter asterisk communication
>
> Question1: I want to configure speex on 2.15kbs and packetization of 60ms
> seconds for that is have configured "codecs.conf" for desired result and
> also placed a line in general section of "sip.conf" allow=speex:60 after
> disallow=all line .
>
> I have also configure SIP trunk between two asterisk to use speex:60
> During debugging I have checked that both side accept speex as a codec for
> call and ptime:60 but
>
> I am facing following unexpected results
>
> 1-> When I check the packet rate from one asterisk to other asterisk for one
> call its not (1000/60 == 17)?
>
> 2-> When ever I change the softphone result changes i.e. data ratae chages ?
>
> 3-> How can I use my own codec "xyz" in asterisk to place calls ?
>
> 4->if I change the codecs.conf then no results appears in packet size which
> is comming out of asterisk?
>
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>