[asterisk-users] Conflict between jumper settings and dmesg with OctoBRI

[Olivier]

Hello,

In my system, dmesg outputs :

[   13.039788] wcb4xxp 0000:01:0a.0: probe called for b4xx...
[   13.039788] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) ->
IRQ 21
[   13.039788] wcb4xxp 0000:01:0a.0: Identified HFC-8S Junghanns.NET octoBRI
PCI (controller rev 1) at 0001dfe0, IRQ 21
[   13.041202] wcb4xxp 0000:01:0a.0: NOTE: hardware echo cancellation has
been disabled
[   13.041477] wcb4xxp 0000:01:0a.0: Port 1: TE mode
[   13.041591] wcb4xxp 0000:01:0a.0: Port 2: NT mode
[   13.044952] wcb4xxp 0000:01:0a.0: Port 3: TE mode
[   13.045116] wcb4xxp 0000:01:0a.0: Port 4: TE mode
[   13.045116] wcb4xxp 0000:01:0a.0: Port 5: TE mode
[   13.045116] wcb4xxp 0000:01:0a.0: Port 6: TE mode
[   13.045116] wcb4xxp 0000:01:0a.0: Port 7: TE mode
[   13.045116] wcb4xxp 0000:01:0a.0: Port 8: TE mode
[   13.045116] wcb4xxp 0000:01:0a.0: Did not do the highestorder stuff
[   13.139884] wcb4xxp 0000:01:0a.0: new card sync source: port 3
[   13.630304] wcb4xxp 0000:01:0a.0: Span 5 has invalid sync priority (5),
removing from sync source list
[   13.630304] wcb4xxp 0000:01:0a.0: Span 6 has invalid sync priority (6),
removing from sync source list
[   13.630304] wcb4xxp 0000:01:0a.0: Span 7 has invalid sync priority (7),
removing from sync source list
[   13.630304] wcb4xxp 0000:01:0a.0: Span 8 has invalid sync priority (8),
removing from sync source list
[   13.666827] dahdi_echocan_oslec: Registered echo canceler 'OSLEC'
[   13.671632] dahdi: Registered tone zone 2 (France)
[   13.730925] wcb4xxp 0000:01:0a.0: new card sync source: port 1


The strange thing is I'm quite certain the jumper for port 2 is set to TE
mode (I checked twice).
Could this come for a bug in wcb4xxp ?
The card is an old Junghanns OctoBRI.

Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100508/11dc16a7/attachment.htm