[asterisk-users] Trying to configure xorcom on Suse 11

[Tim Panton]

On 27 Mar 2010, at 21:48, JD Austin wrote:

> Xorcom hardware uses three layers; you must resolve issues in the 
> following order:
> 
>   1. USB
>   2. Dahdi
>   3. Asterisk
> 
> I suspect you're having trouble with the usb layer.
> Run lsusb
> It will display a line like this if the firmware isn't loaded:
> Bus 001 Device 004: ID e4e4:1161
> If it is e4e4:1162 then the firmware is loaded.
> You can manually load the firmware like this:
> 
>    /usr/share/dahdi/xpp_fxloader load
>    or
>    /usr/share/dahdi/xpp_fxloader usb 
> 


It seems to load (some) usb firmware ok, as you can see from the
syslog, but I suspect it is loading the wrong version.
I got e4e4:1164 (I think - I've lost contact with the box for the moment).

Thanks for the explanation too.

Tim Panton - Web/VoIP consultant and implementor
www.westhawk.co.uk