[asterisk-users] Trying to configure xorcom on Suse 11

[JD Austin]

Xorcom hardware uses three layers; you must resolve issues in the 
following order:

   1. USB
   2. Dahdi
   3. Asterisk

I suspect you're having trouble with the usb layer.
Run lsusb
It will display a line like this if the firmware isn't loaded:
Bus 001 Device 004: ID e4e4:1161
If it is e4e4:1162 then the firmware is loaded.
You can manually load the firmware like this:

    /usr/share/dahdi/xpp_fxloader load
    or
    /usr/share/dahdi/xpp_fxloader usb