[asterisk-users] Followme broken

[--[ UxBoD ]--]

----- "Sean Brady" <sbrady at gtfservices.com> wrote:

> > ----- "--[ UxBoD ]--" <uxbod at splatnix.net> wrote:
> 
> > > ----- "--[ UxBoD ]--" <uxbod at splatnix.net> wrote:
> > >  
> > > > Hi,
> > > > 
> > > > we are running Asterisk 1.6.1.14 and have a issue that when we
> use
> > > > followme the call is correctly placed to the mobile phone, the
> > > mobile
> > > > rings, but when answered we do not hear the normal followme
> > > > introduction message.  If we press 1 to accept there is just
> > > silence. 
> > > > Has anybody else seen this issue before ?
> > > > 
> > > Ran a tcpdump against the session this morning and all SIP
> packets
> > > look fine.  If I phone the mobile without using followme, so go
> > > direct, all is okay.  Any ideas please ?
> > >
> 
> > Ran a full trace against the issue and I see that SIP is established
> between the PBX and the mobile phone, but at that  >point no RTP
> packets are sent.  We are using NAT but the firewall takes care of
> that and the session state.  I have >checked all the SIP packets and
> both the header and payload contains our public IP.
> >-- 
> >Thanks, Phil
> 
> 
> 
> I am seeing the exact same behavior on 1.6.2.5.   Could this have
> anything to do with issue #16816?  I'm no developer here, the reason
> that I think it might be related is that both apps depend on the
> second leg of the call to be answered, and it appears that for some
> reason the apps don't think that the answer has occurred.  
> 
> Please let me know what you would like to see from debugging,
> messages, etc. if you need more information.
> 

Please try the patch here as it worked for me :- https://issues.asterisk.org/view.php?id=16929

-- 
Thanks, Phil