[asterisk-users] Reloading queue members (realtime DB)

[Mike]

I ended up restarting Asterisk (that worked, proving that my config isn't
the issue) but I was hoping something less "intrusive" would work.

 

Regards,

 

Mike

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Aksel Celasun
Sent: Tuesday, June 01, 2010 6:41
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Reloading queue members (realtime DB)

 

Try ”queue show”

And ”queue show rules” and mail the output back.

 

 

Regards

 

Aksel

 

Fra: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] På vegne av Mike
Sendt: 31. mai 2010 21:35
Til: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Emne: Re: [asterisk-users] Reloading queue members (realtime DB)

 

I did, "show queues" doesn't show the membernames, but the interface (which
is normal if the membername is NULL in the table, but it isn't).

 

Mike

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Aksel Celasun
Sent: Monday, May 31, 2010 15:27
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Reloading queue members (realtime DB)

 

Hello there.

 

 

Have you tried ”reload” in CLI?

 

 

Greeting 

Aksel

 

Fra: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] På vegne av Mike
Sendt: 31. mai 2010 21:00
Til: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Emne: [asterisk-users] Reloading queue members (realtime DB)

 

Hi,

 

Asterisk 1.4.31 here.  I have a queue with members defined, and those member
have member names "member 1", "member 2", etc.  They are in a realtime DB.

 

When I modify those member names (column membername) the changes aren't
reflected in the queue status ("show queues" from cli. They aren't reflected
when a new call comes in, or when I reload the dialplan.

 

What do I need to do for the changes to be shown in the CLI, short of
restarting Asterisk?

 

Regards,

 

Mike

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100601/13da3ee9/attachment.htm