[asterisk-users] Reloading queue members (realtime DB)

[Aksel Celasun]

Try "queue show"
And "queue show rules" and mail the output back.


Regards

Aksel

Fra: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] På vegne av Mike
Sendt: 31. mai 2010 21:35
Til: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Emne: Re: [asterisk-users] Reloading queue members (realtime DB)

I did, "show queues" doesn't show the membernames, but the interface (which is normal if the membername is NULL in the table, but it isn't).

Mike

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Aksel Celasun
Sent: Monday, May 31, 2010 15:27
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Reloading queue members (realtime DB)

Hello there.


Have you tried "reload" in CLI?


Greeting
Aksel

Fra: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] På vegne av Mike
Sendt: 31. mai 2010 21:00
Til: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Emne: [asterisk-users] Reloading queue members (realtime DB)

Hi,

Asterisk 1.4.31 here.  I have a queue with members defined, and those member have member names "member 1", "member 2", etc.  They are in a realtime DB.

When I modify those member names (column membername) the changes aren't reflected in the queue status ("show queues" from cli. They aren't reflected when a new call comes in, or when I reload the dialplan.

What do I need to do for the changes to be shown in the CLI, short of restarting Asterisk?

Regards,

Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100601/f2b9d1b9/attachment.htm