[asterisk-users] Update the LCD with the callee's name after dialing

[unserossi at aol.com]

-----Original Message-----
From: Ryan Wagoner <rswagoner at gmail.com>
To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com>
Sent: Thu, Jul 1, 2010 6:19 pm
Subject: Re: [asterisk-users] Update the LCD with the callee's name after dialing


On Thu, Jul 1, 2010 at 11:52 AM,  <unserossi at aol.com> wrote:
 Thanks a lot.

 Applying the patch gives me a

 Hunk #5 failed at 9881



 -----Original Message-----
 From: Ryan Wagoner <rswagoner at gmail.com>
 To: Asterisk Users Mailing List - Non-Commercial Discussion
 <asterisk-users at lists.digium.com>
 Sent: Thu, Jul 1, 2010 5:37 pm
 Subject: Re: [asterisk-users] Update the LCD with the callee's name after
 dialing

 On Thu, Jul 1, 2010 at 11:29 AM,  <unserossi at aol.com> wrote:
> Sounds great.
>
> Could you please give me a hint how to install the patch?
> Sorry for my stupid question but I'm a newbie to Asterisk.
>
> Thanks.
>
>
>
> -----Original Message-----
> From: Ryan Wagoner <rswagoner at gmail.com>
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> <asterisk-users at lists.digium.com>
> Sent: Thu, Jul 1, 2010 5:06 pm
> Subject: Re: [asterisk-users] Update the LCD with the callee's name after
> dialing
>
> On Thu, Jul 1, 2010 at 8:41 AM, Doug Lytle <support at drdos.info> wrote:
>> Ryan Wagoner wrote:
>>>
>>> together one for 1.4 that compiles. I'll post both to the list
>>> hopefully later today.
>>>
>>>
>>
>> Thank you!
>>
>> Doug
>>
>> --
>>
>
> The Asterisk 1.6.1.20 and 1.4.33.1 patches are almost identical. Both
> compile but need to be tested to verify that they work. I have the
> 1.6.2.9 version in production and plan to put the 1.6.1.20 version in
> sometime this weekend.
>
> In you are just using Asterisk in the dialplan you can set the called
> remote party id with something like below. Otherwise check out the
> previous FreePBX 2.7 patch.
>
> exten =>
>
> 100,1,SIPCalledRPID(${SIPPEER(${EXTEN}:callerid_name)},${SIPPEER(${EXTEN}:callerid_num)})
>
> Ryan

 If you installed Asterisk from source you just need to patch and
 recompile / install.

 cd asterisk-version
 patch -p1 < ../asterisk-verson-called-
 rpid.patch
 make install

 Otherwise if your using trixbox, etc you would probably want to grab
 their SRPMS, add the patch to the spec file, and rebuild them. However
 that is outside of the scope of this mailing list.

 Ryan
Which version of Asterisk? The patches were made against the latest
eleases. If you are running an earlier version you might need to
anually patch your install.
Ryan
--
Version 1.6.1.20
But it was my individual problem. Installing from scratch solved the patching issue.
Now the application SIPCalledRPID is active and gets executed but i still don't get the name of the called person 
on my display. Maybe this is client dependent? I am using 3CX Softphone. Or is somethins else missing?
_____________________________________________________________________
- Bandwidth and Colocation Provided by http://www.api-digital.com --
ew to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello
asterisk-users mailing list
o UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100701/8c9afa23/attachment.htm