[asterisk-users] Update the LCD with the callee's name after dialing

[Ryan Wagoner]

On Thu, Jul 1, 2010 at 11:52 AM,  <unserossi at aol.com> wrote:
> Thanks a lot.
>
> Applying the patch gives me a
>
> Hunk #5 failed at 9881
>
>
>
> -----Original Message-----
> From: Ryan Wagoner <rswagoner at gmail.com>
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> <asterisk-users at lists.digium.com>
> Sent: Thu, Jul 1, 2010 5:37 pm
> Subject: Re: [asterisk-users] Update the LCD with the callee's name after
> dialing
>
> On Thu, Jul 1, 2010 at 11:29 AM,  <unserossi at aol.com> wrote:
>> Sounds great.
>>
>> Could you please give me a hint how to install the patch?
>> Sorry for my stupid question but I'm a newbie to Asterisk.
>>
>> Thanks.
>>
>>
>>
>> -----Original Message-----
>> From: Ryan Wagoner <rswagoner at gmail.com>
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> <asterisk-users at lists.digium.com>
>> Sent: Thu, Jul 1, 2010 5:06 pm
>> Subject: Re: [asterisk-users] Update the LCD with the callee's name after
>> dialing
>>
>> On Thu, Jul 1, 2010 at 8:41 AM, Doug Lytle <support at drdos.info> wrote:
>>> Ryan Wagoner wrote:
>>>>
>>>> together one for 1.4 that compiles. I'll post both to the list
>>>> hopefully later today.
>>>>
>>>>
>>>
>>> Thank you!
>>>
>>> Doug
>>>
>>> --
>>>
>>
>> The Asterisk 1.6.1.20 and 1.4.33.1 patches are almost identical. Both
>> compile but need to be tested to verify that they work. I have the
>> 1.6.2.9 version in production and plan to put the 1.6.1.20 version in
>> sometime this weekend.
>>
>> In you are just using Asterisk in the dialplan you can set the called
>> remote party id with something like below. Otherwise check out the
>> previous FreePBX 2.7 patch.
>>
>> exten =>
>>
>> 100,1,SIPCalledRPID(${SIPPEER(${EXTEN}:callerid_name)},${SIPPEER(${EXTEN}:callerid_num)})
>>
>> Ryan
>
> If you installed Asterisk from source you just need to patch and
> recompile / install.
>
> cd asterisk-version
> patch -p1 < ../asterisk-verson-called-
> rpid.patch
> make install
>
> Otherwise if your using trixbox, etc you would probably want to grab
> their SRPMS, add the patch to the spec file, and rebuild them. However
> that is outside of the scope of this mailing list.
>
> Ryan
>

Which version of Asterisk? The patches were made against the latest
releases. If you are running an earlier version you might need to
manually patch your install.

Ryan