[asterisk-users] Xorcom problem after update from zaptel to dahdi-2.2.1

[Loic Didelot]

Hello,
dahdi_registration on seems to solve my problem.

Best regards,
Loic.


On Sat, 2010-01-23 at 14:14 +0100, Loic Didelot wrote:
> Hello,
> I am trying to update to dahdi 2.2.1. But somehow the xorcom (2BRI)
> device does not want to work.
> 
> I pasted below the information I have.
> 
> 
> pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader reset
> 
> pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader usb
> 'xpp_fxloader'[4937]: --------- FIRMWARE LOADING: (usb) [1 devices]
> ..Got all 1 devices
> 'xpp_fxloader'[5003]: --------- FIRMWARE IS LOADED
> pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader load
> 'xpp_fxloader'[5015]: --------- FIRMWARE LOADING: (load) [1 devices]
> Got all 1 devices
> INFO: usb:005/004: ID=E4E4:1141 [Xorcom LTD / Astribank / ]
> INFO: Loading hexfile to FPGA: /usr/share/dahdi/FPGA_1141.hex (version
> 6799)
> INFO: usb:005/004: ID=E4E4:1141 [Xorcom LTD / Astribank / ]
> INFO: Load PIC: /usr/share/dahdi/PIC_TYPE_1.hex (version 7498)
> INFO: Load PIC: /usr/share/dahdi/PIC_TYPE_2.hex (version 7107)
> INFO: Load PIC: /usr/share/dahdi/PIC_TYPE_3.hex (version 7107)
> INFO: Load PIC: /usr/share/dahdi/PIC_TYPE_4.hex (version 7308)
> INFO: usb:005/004: ID=E4E4:1141 [Xorcom LTD / Astribank / ]
> astribank_usb.c:366: ERROR(astribank_close): Releasing interface: usb:
> could not release intf 1: No such device
> ..Got all 1 devices
> 'xpp_fxloader'[5132]: --------- FIRMWARE IS LOADED
> 
> pbx at loicvoip1:~# lsusb 
> Bus 005 Device 005: ID e4e4:1142  
> Bus 005 Device 001: ID 0000:0000  
> Bus 004 Device 001: ID 0000:0000  
> Bus 003 Device 001: ID 0000:0000  
> Bus 002 Device 001: ID 0000:0000  
> Bus 001 Device 001: ID 0000:0000  
> 
> pbx at loicvoip1:~# dahdi_hardware -v
> usb:005/005          xpp_usb-     e4e4:1142 Astribank-BRI FPGA-firmware
> 
> pbx at loicvoip1:~# ls /proc/bus/usb/ -R
> /proc/bus/usb/:
> 001  002  003  004  005  devices
> 
> /proc/bus/usb/001:
> 001
> 
> /proc/bus/usb/002:
> 001
> 
> /proc/bus/usb/003:
> 001
> 
> /proc/bus/usb/004:
> 001
> 
> /proc/bus/usb/005:
> 001  005
> 
> 
> Thanks in advance,
> Loic Didelot.
> 
>