[asterisk-users] Xorcom problem after update from zaptel to dahdi-2.2.1

[Loic Didelot]

Hello,
I am trying to update to dahdi 2.2.1. But somehow the xorcom (2BRI)
device does not want to work.

I pasted below the information I have.


pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader reset

pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader usb
'xpp_fxloader'[4937]: --------- FIRMWARE LOADING: (usb) [1 devices]
..Got all 1 devices
'xpp_fxloader'[5003]: --------- FIRMWARE IS LOADED
pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader load
'xpp_fxloader'[5015]: --------- FIRMWARE LOADING: (load) [1 devices]
Got all 1 devices
INFO: usb:005/004: ID=E4E4:1141 [Xorcom LTD / Astribank / ]
INFO: Loading hexfile to FPGA: /usr/share/dahdi/FPGA_1141.hex (version
6799)
INFO: usb:005/004: ID=E4E4:1141 [Xorcom LTD / Astribank / ]
INFO: Load PIC: /usr/share/dahdi/PIC_TYPE_1.hex (version 7498)
INFO: Load PIC: /usr/share/dahdi/PIC_TYPE_2.hex (version 7107)
INFO: Load PIC: /usr/share/dahdi/PIC_TYPE_3.hex (version 7107)
INFO: Load PIC: /usr/share/dahdi/PIC_TYPE_4.hex (version 7308)
INFO: usb:005/004: ID=E4E4:1141 [Xorcom LTD / Astribank / ]
astribank_usb.c:366: ERROR(astribank_close): Releasing interface: usb:
could not release intf 1: No such device
..Got all 1 devices
'xpp_fxloader'[5132]: --------- FIRMWARE IS LOADED

pbx at loicvoip1:~# lsusb 
Bus 005 Device 005: ID e4e4:1142  
Bus 005 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  

pbx at loicvoip1:~# dahdi_hardware -v
usb:005/005          xpp_usb-     e4e4:1142 Astribank-BRI FPGA-firmware

pbx at loicvoip1:~# ls /proc/bus/usb/ -R
/proc/bus/usb/:
001  002  003  004  005  devices

/proc/bus/usb/001:
001

/proc/bus/usb/002:
001

/proc/bus/usb/003:
001

/proc/bus/usb/004:
001

/proc/bus/usb/005:
001  005


Thanks in advance,
Loic Didelot.