[asterisk-users] New Xorcom FXS USB Bank is not loading firmware

[Loic Didelot]

Thank you,
the mounting part was missing in my setup.

Loïc.



On Fri, 2009-09-25 at 20:01 +0300, Tzafrir Cohen wrote:
> On Fri, Sep 25, 2009 at 04:30:19PM +0200, Loic Didelot wrote:
> > # lsusb 
> > Bus 002 Device 003: ID e4e4:1160  
> > Bus 002 Device 001: ID 0000:0000  
> > Bus 001 Device 003: ID 0403:e6c8 Future Technology Devices
> > International, Ltd 
> > Bus 001 Device 002: ID 0403:6001 Future Technology Devices
> > International, Ltd FT232 USB-Serial (UART) IC
> > Bus 001 Device 001: ID 0000:0000  
> > # ls /proc/bus/usb -a
> > .  ..
> 
> Add the following line to /etc/fstab:
> 
> procbususb /proc/bus/usb usbfs defaults 0 0
> 
> 
> Then run:
> 
>   mount /proc/bus/usb
> 
> (or: 'mount -a')
> 
> Once that is in place, either disconnect and reconnect the Astribank, or
> use:
> 
>   /usr/share/dahdi/xpp_fxloader usb
> 
-- 
Loïc DIDELOT
MIXvoip S.a.
Tel: +352 20 3333 20
Fax: +352 20 3333 90
ldidelot at mixvoip.com
http://www.mixvoip.com