[asterisk-users] ASTERISK and SNMP

Fri Nov 27 17:11:27 CST 2009

It will be the same, I already have 4 E1 interfaces. but no information in
the MIB

2009/11/28 michal kalinowski <michal.kalinowski at interia.pl>

> Yes I know about that :) at this moment i have only machine with
> lo,eth0,eth1,sit0.
> On monday I will check that command on the server with e1 card.
>
> BR,
> Michał
>
> W dniu 27 listopada 2009 23:51 użytkownik mickael ropars
> <mropars at gmail.com> napisał:
> > Michal,
> >
> > in the IF-MIB you only have 4 interfaces lo,eth0,eth1,sit0
> >
> > l0  which is the loopback interface
> > eth0, eth1 : ethernet interface
> > sit0 : use for PTP tunneling (use for IPv6)
> >
> > so no information on the digium interface.
> >
> > my IF MIB has also those interfaces
> >
> > I found one the solution to get status of the cards, and all snmp data.
> the
> > solution is argus :
> > http://argus.tcp4me.com/
> >
> > with this tools you can have a complete view of your system.
> >
> > regards
> >
> > Mickael
> >
> > 2009/11/27 michal kalinowski <michal.kalinowski at interia.pl>
> >>
> >> Check this command "snmpwalk -c your_community -v 1 localhost
> interfaces"
> >>
> >> in my system it's looks like that:
> >>
> >> IF-MIB::ifNumber.0 = INTEGER: 4
> >> IF-MIB::ifIndex.1 = INTEGER: 1
> >> IF-MIB::ifIndex.2 = INTEGER: 2
> >> IF-MIB::ifIndex.3 = INTEGER: 3
> >> IF-MIB::ifIndex.4 = INTEGER: 4
> >> IF-MIB::ifDescr.1 = STRING: lo
> >> IF-MIB::ifDescr.2 = STRING: eth0
> >> IF-MIB::ifDescr.3 = STRING: eth1
> >> IF-MIB::ifDescr.4 = STRING: sit0
> >> IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
> >> IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
> >> IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
> >> IF-MIB::ifType.4 = INTEGER: tunnel(131)
> >> IF-MIB::ifMtu.1 = INTEGER: 16436
> >> IF-MIB::ifMtu.2 = INTEGER: 1500
> >> IF-MIB::ifMtu.3 = INTEGER: 1500
> >> IF-MIB::ifMtu.4 = INTEGER: 1480
> >> IF-MIB::ifSpeed.1 = Gauge32: 10000000
> >> IF-MIB::ifSpeed.2 = Gauge32: 10000000
> >> IF-MIB::ifSpeed.3 = Gauge32: 1000000000
> >> IF-MIB::ifSpeed.4 = Gauge32: 0
> >> IF-MIB::ifPhysAddress.1 = STRING:
> >> IF-MIB::ifPhysAddress.2 = STRING: 0:14:5e:32:15:70
> >> IF-MIB::ifPhysAddress.3 = STRING: 0:14:5e:32:15:71
> >> IF-MIB::ifPhysAddress.4 = STRING:
> >> IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
> >> IF-MIB::ifAdminStatus.2 = INTEGER: down(2)
> >> IF-MIB::ifAdminStatus.3 = INTEGER: up(1)
> >> IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
> >> IF-MIB::ifOperStatus.1 = INTEGER: up(1)
> >> IF-MIB::ifOperStatus.2 = INTEGER: down(2)
> >> IF-MIB::ifOperStatus.3 = INTEGER: up(1)
> >> IF-MIB::ifOperStatus.4 = INTEGER: down(2)
> >> IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
> >> IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
> >> IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
> >> IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
> >> IF-MIB::ifInOctets.1 = Counter32: 37919437
> >> IF-MIB::ifInOctets.2 = Counter32: 0
> >> IF-MIB::ifInOctets.3 = Counter32: 1491657594
> >> IF-MIB::ifInOctets.4 = Counter32: 0
> >> IF-MIB::ifInUcastPkts.1 = Counter32: 335932
> >> IF-MIB::ifInUcastPkts.2 = Counter32: 0
> >> IF-MIB::ifInUcastPkts.3 = Counter32: 162961409
> >> IF-MIB::ifInUcastPkts.4 = Counter32: 0
> >> IF-MIB::ifInNUcastPkts.1 = Counter32: 0
> >> IF-MIB::ifInNUcastPkts.2 = Counter32: 0
> >> IF-MIB::ifInNUcastPkts.3 = Counter32: 131166
> >> IF-MIB::ifInNUcastPkts.4 = Counter32: 0
> >> IF-MIB::ifInDiscards.1 = Counter32: 0
> >> IF-MIB::ifInDiscards.2 = Counter32: 0
> >> IF-MIB::ifInDiscards.3 = Counter32: 0
> >> IF-MIB::ifInDiscards.4 = Counter32: 0
> >> IF-MIB::ifInErrors.1 = Counter32: 0
> >> IF-MIB::ifInErrors.2 = Counter32: 0
> >> IF-MIB::ifInErrors.3 = Counter32: 0
> >> IF-MIB::ifInErrors.4 = Counter32: 0
> >> IF-MIB::ifInUnknownProtos.1 = Counter32: 0
> >> IF-MIB::ifInUnknownProtos.2 = Counter32: 0
> >> IF-MIB::ifInUnknownProtos.3 = Counter32: 0
> >> IF-MIB::ifInUnknownProtos.4 = Counter32: 0
> >> IF-MIB::ifOutOctets.1 = Counter32: 37919437
> >> IF-MIB::ifOutOctets.2 = Counter32: 0
> >> IF-MIB::ifOutOctets.3 = Counter32: 3525337520
> >> IF-MIB::ifOutOctets.4 = Counter32: 0
> >> IF-MIB::ifOutUcastPkts.1 = Counter32: 335932
> >> IF-MIB::ifOutUcastPkts.2 = Counter32: 0
> >> IF-MIB::ifOutUcastPkts.3 = Counter32: 38811075
> >> IF-MIB::ifOutUcastPkts.4 = Counter32: 0
> >> IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
> >> IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
> >> IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
> >> IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
> >> IF-MIB::ifOutDiscards.1 = Counter32: 0
> >> IF-MIB::ifOutDiscards.2 = Counter32: 0
> >> IF-MIB::ifOutDiscards.3 = Counter32: 0
> >> IF-MIB::ifOutDiscards.4 = Counter32: 0
> >> IF-MIB::ifOutErrors.1 = Counter32: 0
> >> IF-MIB::ifOutErrors.2 = Counter32: 0
> >> IF-MIB::ifOutErrors.3 = Counter32: 0
> >> IF-MIB::ifOutErrors.4 = Counter32: 0
> >> IF-MIB::ifOutQLen.1 = Gauge32: 0
> >> IF-MIB::ifOutQLen.2 = Gauge32: 0
> >> IF-MIB::ifOutQLen.3 = Gauge32: 0
> >> IF-MIB::ifOutQLen.4 = Gauge32: 0
> >> IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
> >> IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
> >> IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
> >> IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero
> >>
> >> here You have information about interface descryptions, status, speed,
> >> type, etc.
> >>
> >> BR,
> >> Michał
> >> 2009/11/27 Mr. James W. Laferriere <babydr at baby-dragons.com>:
> >> >        Hello Micha (& all) ,
> >> >
> >> > On Fri, 27 Nov 2009, michal kalinowski wrote:
> >> >>
> >> >> Your Digium card is for linux standard interface like eth0
> (ethernet),
> >> >> check IF-MIB.txt and OID from there.
> >> >> BR,
> >> >> Micha?
> >> >
> >> >        When doing a snmpwalk of the IF-MIB & having a (*) installed
> >> > there is
> >> > no mention of an interface associated with this card .  Now it is
> quite
> >> > possible that Digium in there wisdom has added the necessary
> components
> >> > to
> >> > their drivers that inserts the necessary components into the IF tables
> >> > thus
> >> > allowing snmp's IF-MIB to see a known interface .
> >> >
> >> >        If this is the case where in the driver (or code base) might I
> >> > find
> >> > this revelation .  I'd sure like to have statistics & traps being
> dumped
> >> > for
> >> > this card .
> >> >
> >> > (*)
> >> > 01:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
> >> > Modem/ISDN
> >> > interface
> >> >
> >> >                Tia ,  JimL
> >> >
> >> >> 2009/11/27 mickael ropars <mropars at gmail.com>:
> >> >>>
> >> >>> Everuthing is working fine, but I have another question to SNMP
> users:
> >> >>>
> >> >>> There is no hardware info in the MIB.
> >> >>>
> >> >>> How can you do to send alarm (when one interface is down for
> exemple),
> >> >>> is
> >> >>> there no way to check its status?
> >> >>>
> >> >>> NB: I am using a Digium card
> >> >>>
> >> >>> regards
> >> >>>
> >> >>> Mickael
> >> >>>
> >> >>> 2009/11/27 mickael ropars <mropars at gmail.com>
> >> >>>>
> >> >>>> Hi all,
> >> >>>>
> >> >>>> I am currently not able to configure SNMP for asterisk, but I am
> not
> >> >>>> able
> >> >>>> to acess to the asterisk MIB (the asterisk MIB is in
> >> >>>> /usr/share/snmp/mibs/)
> >> >>>>
> >> >>>>
> >> >>>> Does somebody has an example of smnpd.conf file wich is working ?
> >> >>>>
> >> >>>> regards
> >> >>>>
> >> >>>> Mickael
> >> >>>
> >> >>>
> >> >>> _______________________________________________
> >> >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com--
> >> >>>
> >> >>> asterisk-users mailing list
> >> >>> To UNSUBSCRIBE or update options visit:
> >> >>>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >> >>>
> >> >>
> >> >> _______________________________________________
> >> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com--
> >> >>
> >> >> asterisk-users mailing list
> >> >> To UNSUBSCRIBE or update options visit:
> >> >>  http://lists.digium.com/mailman/listinfo/asterisk-users
> >> >>
> >> >
> >> > --
> >> > +------------------------------------------------------------------+
> >> > | James   W.   Laferriere | System    Techniques | Give me VMS     |
> >> > | Network&System Engineer | 3237     Holden Road |  Give me Linux  |
> >> > | babydr at baby-dragons.com | Fairbanks, AK. 99709 |   only  on  AXP |
> >> > +------------------------------------------------------------------+
> >> > _______________________________________________
> >> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >> >
> >> > asterisk-users mailing list
> >> > To UNSUBSCRIBE or update options visit:
> >> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >> >
> >>
> >> _______________________________________________
> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >>
> >> asterisk-users mailing list
> >> To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> > asterisk-users mailing list
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091128/99c3662c/attachment.htm 