[asterisk-users] ASTERISK and SNMP

michal kalinowski michal.kalinowski at interia.pl
Fri Nov 27 17:01:10 CST 2009 

Yes I know about that :) at this moment i have only machine with
lo,eth0,eth1,sit0.
On monday I will check that command on the server with e1 card.

BR,
Michał

W dniu 27 listopada 2009 23:51 użytkownik mickael ropars
<mropars at gmail.com> napisał:
> Michal,
>
> in the IF-MIB you only have 4 interfaces lo,eth0,eth1,sit0
>
> l0  which is the loopback interface
> eth0, eth1 : ethernet interface
> sit0 : use for PTP tunneling (use for IPv6)
>
> so no information on the digium interface.
>
> my IF MIB has also those interfaces
>
> I found one the solution to get status of the cards, and all snmp data. the
> solution is argus :
> http://argus.tcp4me.com/
>
> with this tools you can have a complete view of your system.
>
> regards
>
> Mickael
>
> 2009/11/27 michal kalinowski <michal.kalinowski at interia.pl>
>>
>> Check this command "snmpwalk -c your_community -v 1 localhost interfaces"
>>
>> in my system it's looks like that:
>>
>> IF-MIB::ifNumber.0 = INTEGER: 4
>> IF-MIB::ifIndex.1 = INTEGER: 1
>> IF-MIB::ifIndex.2 = INTEGER: 2
>> IF-MIB::ifIndex.3 = INTEGER: 3
>> IF-MIB::ifIndex.4 = INTEGER: 4
>> IF-MIB::ifDescr.1 = STRING: lo
>> IF-MIB::ifDescr.2 = STRING: eth0
>> IF-MIB::ifDescr.3 = STRING: eth1
>> IF-MIB::ifDescr.4 = STRING: sit0
>> IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
>> IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
>> IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
>> IF-MIB::ifType.4 = INTEGER: tunnel(131)
>> IF-MIB::ifMtu.1 = INTEGER: 16436
>> IF-MIB::ifMtu.2 = INTEGER: 1500
>> IF-MIB::ifMtu.3 = INTEGER: 1500
>> IF-MIB::ifMtu.4 = INTEGER: 1480
>> IF-MIB::ifSpeed.1 = Gauge32: 10000000
>> IF-MIB::ifSpeed.2 = Gauge32: 10000000
>> IF-MIB::ifSpeed.3 = Gauge32: 1000000000
>> IF-MIB::ifSpeed.4 = Gauge32: 0
>> IF-MIB::ifPhysAddress.1 = STRING:
>> IF-MIB::ifPhysAddress.2 = STRING: 0:14:5e:32:15:70
>> IF-MIB::ifPhysAddress.3 = STRING: 0:14:5e:32:15:71
>> IF-MIB::ifPhysAddress.4 = STRING:
>> IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
>> IF-MIB::ifAdminStatus.2 = INTEGER: down(2)
>> IF-MIB::ifAdminStatus.3 = INTEGER: up(1)
>> IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
>> IF-MIB::ifOperStatus.1 = INTEGER: up(1)
>> IF-MIB::ifOperStatus.2 = INTEGER: down(2)
>> IF-MIB::ifOperStatus.3 = INTEGER: up(1)
>> IF-MIB::ifOperStatus.4 = INTEGER: down(2)
>> IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
>> IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
>> IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
>> IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
>> IF-MIB::ifInOctets.1 = Counter32: 37919437
>> IF-MIB::ifInOctets.2 = Counter32: 0
>> IF-MIB::ifInOctets.3 = Counter32: 1491657594
>> IF-MIB::ifInOctets.4 = Counter32: 0
>> IF-MIB::ifInUcastPkts.1 = Counter32: 335932
>> IF-MIB::ifInUcastPkts.2 = Counter32: 0
>> IF-MIB::ifInUcastPkts.3 = Counter32: 162961409
>> IF-MIB::ifInUcastPkts.4 = Counter32: 0
>> IF-MIB::ifInNUcastPkts.1 = Counter32: 0
>> IF-MIB::ifInNUcastPkts.2 = Counter32: 0
>> IF-MIB::ifInNUcastPkts.3 = Counter32: 131166
>> IF-MIB::ifInNUcastPkts.4 = Counter32: 0
>> IF-MIB::ifInDiscards.1 = Counter32: 0
>> IF-MIB::ifInDiscards.2 = Counter32: 0
>> IF-MIB::ifInDiscards.3 = Counter32: 0
>> IF-MIB::ifInDiscards.4 = Counter32: 0
>> IF-MIB::ifInErrors.1 = Counter32: 0
>> IF-MIB::ifInErrors.2 = Counter32: 0
>> IF-MIB::ifInErrors.3 = Counter32: 0
>> IF-MIB::ifInErrors.4 = Counter32: 0
>> IF-MIB::ifInUnknownProtos.1 = Counter32: 0
>> IF-MIB::ifInUnknownProtos.2 = Counter32: 0
>> IF-MIB::ifInUnknownProtos.3 = Counter32: 0
>> IF-MIB::ifInUnknownProtos.4 = Counter32: 0
>> IF-MIB::ifOutOctets.1 = Counter32: 37919437
>> IF-MIB::ifOutOctets.2 = Counter32: 0
>> IF-MIB::ifOutOctets.3 = Counter32: 3525337520
>> IF-MIB::ifOutOctets.4 = Counter32: 0
>> IF-MIB::ifOutUcastPkts.1 = Counter32: 335932
>> IF-MIB::ifOutUcastPkts.2 = Counter32: 0
>> IF-MIB::ifOutUcastPkts.3 = Counter32: 38811075
>> IF-MIB::ifOutUcastPkts.4 = Counter32: 0
>> IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
>> IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
>> IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
>> IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
>> IF-MIB::ifOutDiscards.1 = Counter32: 0
>> IF-MIB::ifOutDiscards.2 = Counter32: 0
>> IF-MIB::ifOutDiscards.3 = Counter32: 0
>> IF-MIB::ifOutDiscards.4 = Counter32: 0
>> IF-MIB::ifOutErrors.1 = Counter32: 0
>> IF-MIB::ifOutErrors.2 = Counter32: 0
>> IF-MIB::ifOutErrors.3 = Counter32: 0
>> IF-MIB::ifOutErrors.4 = Counter32: 0
>> IF-MIB::ifOutQLen.1 = Gauge32: 0
>> IF-MIB::ifOutQLen.2 = Gauge32: 0
>> IF-MIB::ifOutQLen.3 = Gauge32: 0
>> IF-MIB::ifOutQLen.4 = Gauge32: 0
>> IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
>> IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
>> IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
>> IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero
>>
>> here You have information about interface descryptions, status, speed,
>> type, etc.
>>
>> BR,
>> Michał
>> 2009/11/27 Mr. James W. Laferriere <babydr at baby-dragons.com>:
>> >        Hello Micha (& all) ,
>> >
>> > On Fri, 27 Nov 2009, michal kalinowski wrote:
>> >>
>> >> Your Digium card is for linux standard interface like eth0 (ethernet),
>> >> check IF-MIB.txt and OID from there.
>> >> BR,
>> >> Micha?
>> >
>> >        When doing a snmpwalk of the IF-MIB & having a (*) installed
>> > there is
>> > no mention of an interface associated with this card .  Now it is quite
>> > possible that Digium in there wisdom has added the necessary components
>> > to
>> > their drivers that inserts the necessary components into the IF tables
>> > thus
>> > allowing snmp's IF-MIB to see a known interface .
>> >
>> >        If this is the case where in the driver (or code base) might I
>> > find
>> > this revelation .  I'd sure like to have statistics & traps being dumped
>> > for
>> > this card .
>> >
>> > (*)
>> > 01:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX
>> > Modem/ISDN
>> > interface
>> >
>> >                Tia ,  JimL
>> >
>> >> 2009/11/27 mickael ropars <mropars at gmail.com>:
>> >>>
>> >>> Everuthing is working fine, but I have another question to SNMP users:
>> >>>
>> >>> There is no hardware info in the MIB.
>> >>>
>> >>> How can you do to send alarm (when one interface is down for exemple),
>> >>> is
>> >>> there no way to check its status?
>> >>>
>> >>> NB: I am using a Digium card
>> >>>
>> >>> regards
>> >>>
>> >>> Mickael
>> >>>
>> >>> 2009/11/27 mickael ropars <mropars at gmail.com>
>> >>>>
>> >>>> Hi all,
>> >>>>
>> >>>> I am currently not able to configure SNMP for asterisk, but I am not
>> >>>> able
>> >>>> to acess to the asterisk MIB (the asterisk MIB is in
>> >>>> /usr/share/snmp/mibs/)
>> >>>>
>> >>>>
>> >>>> Does somebody has an example of smnpd.conf file wich is working ?
>> >>>>
>> >>>> regards
>> >>>>
>> >>>> Mickael
>> >>>
>> >>>
>> >>> _______________________________________________
>> >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> >>>
>> >>> asterisk-users mailing list
>> >>> To UNSUBSCRIBE or update options visit:
>> >>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>>
>> >>
>> >> _______________________________________________
>> >> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> >>
>> >> asterisk-users mailing list
>> >> To UNSUBSCRIBE or update options visit:
>> >>  http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>
>> >
>> > --
>> > +------------------------------------------------------------------+
>> > | James   W.   Laferriere | System    Techniques | Give me VMS     |
>> > | Network&System Engineer | 3237     Holden Road |  Give me Linux  |
>> > | babydr at baby-dragons.com | Fairbanks, AK. 99709 |   only  on  AXP |
>> > +------------------------------------------------------------------+
>> > _______________________________________________
>> > -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>> >
>> > asterisk-users mailing list
>> > To UNSUBSCRIBE or update options visit:
>> >   http://lists.digium.com/mailman/listinfo/asterisk-users
>> >
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

More information about the asterisk-users mailing list