[asterisk-users] Silly (??) question about chan_dahdi [SOLVED]
Stefan-Michael Guenther
asterisk02 at in-put.de
Thu May 28 06:17:57 CDT 2009
Hi,
I finally solved the problem.
As I mentioned in one of my earlier postings, I forgot to install libpri
when I compiled the dahdi package for the first time. I fixed that but
did not compile asterisk again. Therefore the chan-dahdi.so obviously
did not contain the necessary code to react to calls.
The second detail was to add
signalling = bri_cpe
to /etc/asterisk/chan_dahdi.conf
Thanks for your help,
Stefan
David Backeberg schrieb:
> On Wed, May 27, 2009 at 2:23 PM, Stefan-Michael Guenther
> <asterisk02 at in-put.de> wrote:
>> *CLI> dialplan show
>> [ Context 'default' created by 'pbx_config' ]
>> '8304478' => 1. ANSWER() [pbx_config]
>> 2. WAIT(10) [pbx_config]
>> 3. HANGUP() [pbx_config]
>> '8304479' => 1. ANSWER() [pbx_config]
>> 2. WAIT(10) [pbx_config]
>> 3. HANGUP() [pbx_config]
>> '83086920' => 1. ANSWER() [pbx_config]
>> 2. WAIT(10) [pbx_config]
>> 3. HANGUP() [pbx_config]
>> '83086921' => 1. ANSWER() [pbx_config]
>> 2. WAIT(10) [pbx_config]
>> 3. HANGUP() [pbx_config]
>>
>
> Your extensions look good. At this point I'm guessing there's
> something silly going on with your physical lines. Do you have an
> ordinary telephone for your country that you can plug in and confirm
> the lines work properly there. I think at this point you need help
> from somebody who knows line signaling for your country. Either your
> phone company or Digium tech support if you have a digium card.
>
--
********************************************
in-put GbR - Das Linux-Systemhaus
Stefan-Michael Guenther
Geschaeftsfuehrer
Moltkestrasse 49 D-76133 Karlsruhe
Tel./Fax : +49 (0)721 / 83044 - 98/93
http://www.in-put.de
********************************************
Schulungen Installationen
Beratung Support
Voice-over-IP-Loesungen
********************************************
More information about the asterisk-users
mailing list