[asterisk-users] Unable to make outbound calls
Kal Feher
kalman.feher at melbourneit.com.au
Tue May 26 08:46:06 CDT 2009
My thoughts exactly. I've tried National2, 4ess and now ni1
ni1 just worked on Asterisk 1.4.22. (failover box I downgraded). So I'm
swapping back to 1.4.24 to test that now.
On 26/5/09 3:34 PM, "Danny Nicholas" <danny at debsinc.com> wrote:
> Based on this link -
> http://www.trixbox.org/forums/vendor-forums-certified/sangoma/a101dx-hangup-
> cause-code-90-outbound-calls
>
> I'd check my polarity settings in dahdi.conf. Maybe signaling?
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kal Feher
> Sent: Tuesday, May 26, 2009 8:22 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Unable to make outbound calls
>
> Sorry. I don't get many opportunities to test this system as its live. Here
> are the results:
>
> -- Executing [9 at DLPN_DialPlan1:1] Dial("SIP/19722-b650fb80", "DAHDI/1")
> in new stack
> -- Requested transfer capability: 0x00 - SPEECH
> -- Called 1
> -- Channel 0/1, span 1 got hangup, cause 90
> WARNING[6454]: app_dial.c:765 wait_for_answer: Unable to forward voice or
> dtmf
> -- Hungup 'DAHDI/1-1'
> == Everyone is busy/congested at this time (1:0/0/1)
>
>
> On 20/5/09 3:52 PM, "Danny Nicholas" <danny at debsinc.com> wrote:
>
>> This all looks ok. What happens if you try to access the DAHDI channel
>> outside of Asterisk control:
>> In dialplan
>> Exten => 9,1,Dial(DAHDI/1)
>>
>> Dial 9
>> Get dialtone
>> Dial number
>>
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kal Feher
>> Sent: Wednesday, May 20, 2009 2:55 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Unable to make outbound calls
>>
>> I attached the show channels in my first post, but removed it to reduce
> the
>> length of replies. Here it is again along with show status.
>> Note that there is only 1 PRI currently attached.
>>
>> geriatrix*CLI> dahdi show status
>> Description Alarms IRQ bpviol
>> CRC4
>> T2XXP (PCI) Card 0 Span 1 OK 0 0
> 0
>> T2XXP (PCI) Card 0 Span 2 RED 0 0
> 0
>>
>> geriatrix*CLI> dahdi show channels
>> Chan Extension Context Language MOH Interpret
>> pseudo default default
>> 1 DID_span_1 default
>> 2 DID_span_1 default
>> 3 DID_span_1 default
>> 4 DID_span_1 default
>> 5 DID_span_1 default
>> 6 DID_span_1 default
>> 7 DID_span_1 default
>> 8 DID_span_1 default
>> 9 DID_span_1 default
>> 10 DID_span_1 default
>> 11 DID_span_1 default
>> 12 DID_span_1 default
>> 13 DID_span_1 default
>> 14 DID_span_1 default
>> 15 DID_span_1 default
>> 16 DID_span_1 default
>> 17 DID_span_1 default
>> 18 DID_span_1 default
>> 19 DID_span_1 default
>> 20 DID_span_1 default
>> 21 DID_span_1 default
>> 22 DID_span_1 default
>> 23 DID_span_1 default
>> 25 DID_span_2 default
>> 26 DID_span_2 default
>> 27 DID_span_2 default
>> 28 DID_span_2 default
>> 29 DID_span_2 default
>> 30 DID_span_2 default
>> 31 DID_span_2 default
>> 32 DID_span_2 default
>> 33 DID_span_2 default
>> 34 DID_span_2 default
>> 35 DID_span_2 default
>> 36 DID_span_2 default
>> 37 DID_span_2 default
>> 38 DID_span_2 default
>> 39 DID_span_2 default
>> 40 DID_span_2 default
>> 41 DID_span_2 default
>> 42 DID_span_2 default
>> 43 DID_span_2 default
>> 44 DID_span_2 default
>> 45 DID_span_2 default
>> 46 DID_span_2 default
>> 47 DID_span_2 default
>>
>>
>>
>> On 19/5/09 6:31 PM, "Danny Nicholas" <danny at debsinc.com> wrote:
>>
>>> Please post your CLI output from dahdi show status and dahdi show
>> channels.
>>>
>>> -----Original Message-----
>>> From: asterisk-users-bounces at lists.digium.com
>>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kal Feher
>>> Sent: Tuesday, May 19, 2009 11:22 AM
>>> To: asterisk-users at lists.digium.com
>>> Subject: Re: [asterisk-users] Unable to make outbound calls
>>>
>>>
>>>> Can you make an outbound call after your first incoming call? That's
>> what
>>> I
>>> experienced with 1.4.24.
>>>
>>> No I can't. I saw similar threads while searching for a solution, but in
>> my
>>> case outbound calls are never possible.
>>>
>>>
>>> Regardless, thank you for your suggestion.
>>>
>>> On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher at melbourneit.com.au> wrote:
>>>
>>>>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>>>>>
>>>>> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>>>>>
>>>>> Inbound calls work fine, but outbound fail with the rather cryptic:
>>>>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full:
> Unable
>>> to
>>>>> create channel of type 'DAHDI' (cause 0 - Unknown)
>>>>>
>>>>> There are similar threads I've found on the net but they tend to be
>>> related
>>> to
>>>>> dahdi not being loaded or similar. In my case dahdi is loaded and
>>> channels
>>>>> visible.
>>>>>
>>>>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from
> another
>>>>> server that is currently working fine. But still no luck.
>>>>>
>>>>> Any hints would be appreciated. In particular if someone can suggest
>> some
>>>>> documentation on what _could_ cause a (cause 0 - Unknown) then I can
>>>>> investigate those.
>>>>>
>>>>> Some details below:
>>>>> <removed in reply to keep email readable>
>>>
--
Kal
More information about the asterisk-users
mailing list