[asterisk-users] [UK SPECIFIC] DAHDI and a OpenVox Card

[Tzafrir Cohen]

On Sun, May 24, 2009 at 03:00:21PM +0100, Dunc wrote:
> Tzafrir Cohen wrote:
> > On Sun, May 24, 2009 at 12:36:26PM +0100, Dunc wrote:

> >> ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
> >> ;;; line="1 WCTDM/4/0"
> >> signalling=fxs_ks
> > 
> > signalling=fxo_ks
> > 
> >> callerid=asreceived
> >> group=0
> >> context=from-pstn
> >> channel => 1
> >> callerid=
> >> group=
> >> context=default
> >>
> >> ;;; line="2 WCTDM/4/1"
> >> signalling=fxo_ls
> > 
> > signalling=fxs_ls
> > 
> >> callerid="Channel 2" <4002>
> >> mailbox=4002
> >> group=5
> >> context=from-internal
> >> channel => 2
> >> callerid=
> >> mailbox=
> >> group=
> >> context=default
> > 
> > After those modifications, re-run dahdi-cfg and in Asterisk: 
> > 
> >   asterisk -rx 'dahdi restart'
> >
> 

> Are you absolutely sure this is the right way round. I thought that an 
> FXO module connected to the wall, and used FXS signalling. And vice 
> versa.  My channel 1 is the one connected to PSTN so surely it should 
> have FXS signalling?

You're correct. I managed to confuse myself. Ignore this advice.

But again: do you see the channels as '(In Use)' on lsdahdi / 'cat
/proc/dahdi/*' ?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir