[asterisk-users] Unable to make outbound calls

[Danny Nicholas]

Please post your CLI output from dahdi show status and dahdi show channels.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Kal Feher
Sent: Tuesday, May 19, 2009 11:22 AM
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] Unable to make outbound calls


> Can you make an outbound call after your first incoming call?  That's what
I
experienced with 1.4.24.

No I can't. I saw similar threads while searching for a solution, but in my
case outbound calls are never possible.


Regardless, thank you for your suggestion.

On 19/5/09 4:47 PM, "Kal Feher" <kalman.feher at melbourneit.com.au> wrote:

>> I've got an asterisk 1.4.24 box with dahdi complete 2.1.0.3+2.1.0.2
>> 
>> I've got a 2 port T2XXP card attached with on T1 currently plugged in.
>> 
>> Inbound calls work fine, but outbound fail with the rather cryptic:
>> [May 19 17:28:07] WARNING[11360]: app_dial.c:1237 dial_exec_full: Unable
to
>> create channel of type 'DAHDI' (cause 0 - Unknown)
>> 
>> There are similar threads I've found on the net but they tend to be
related
to 
>> dahdi not being loaded or similar. In my case dahdi is loaded and
channels
>> visible.
>> 
>> I've rsync'd a configuration (/etc/asterisk and /etc/dahdi) from another
>> server that is currently working fine. But still no luck.
>> 
>> Any hints would be appreciated. In particular if someone can suggest some
>> documentation on what _could_ cause a (cause 0 - Unknown) then I can
>> investigate those.
>> 
>> Some details below:
>> <removed in reply to keep email readable>
 

-- 
Kal 


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users