[asterisk-users] Dialplan Priorities and Sort Order...

[Danny Nicholas]

The first _1866 line should start a new segment of the dialplan.  The way
this should work is 1800 and 1866 go out on zap /g1; anything else falls
into zap/g0.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tim Nelson
Sent: Tuesday, May 19, 2009 10:38 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Dialplan Priorities and Sort Order...

Greetings!

I'm hoping someone can help me with what should be the most basic of
problems. Essentially, I want to have certain calls on an Asterisk 1.2.25
(Yes I know its old, upgrade, etc... its on my roadmap) install go out a
couple of analog lines and all other calls go out a PRI. The analog lines
are setup in Zaptel group 1 and the PRI channels are in Zaptel group 0. Here
is my relevant config:

; Outbound via POTS
[general-outbound]
exten => _1800NXXXXXX,1,Dial(ZAP/g1/${EXTEN})
exten => _1800NXXXXXX,n,Answer
exten => _1800NXXXXXX,n,Busy
exten => _1800NXXXXXX,n,Hangup
exten => _1866NXXXXXX,n,Dial(ZAP/g1/${EXTEN})
exten => _1866NXXXXXX,n,Answer
exten => _1866NXXXXXX,n,Busy
exten => _1866NXXXXXX,n,Hangup
include => pri_outbound

; Outbound via PRI
[pri_outbound]
exten => _X.,101,Dial(ZAP/g0/${EXTEN})
exten => _X.,102,Answer
exten => _X.,103,Busy
exten => _X.,104,Hangup

I certainly cannot be the only one who wants this sort of setup... correct?
Is it the way I'm including the other context, the dial patterns, the
priorities, etc? I'm not opposed to combining it into a single context, I
just started it out with this way. All hints are appreciated. (Pun
intended.. :-) )

--Tim

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users