[asterisk-users] Step-by-Step Asterisk and MeetMe Help
Jimmy Ezell
jezell at hmhca.com
Tue May 19 10:17:27 CDT 2009
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of
>John covici
>Sent: Monday, May 18, 2009 06:05 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [asterisk-users] Step-by-Step Asterisk and MeetMe Help
>
>
>On reading your mail more carefully, it looks like you do have
>ztdummy, do depmod -a and then try to modprobe it.
Same thing happens
[root at localhost ~]# depmod -a
[root at localhost ~]# modprobe ztdummy
FATAL: Module ztdummy not found.
Jimmy
>
>on Monday 05/18/2009 Jimmy Ezell(jezell at hmhca.com) wrote
> >
> > >From: asterisk-users-bounces at lists.digium.com
> > >[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of
> > >John covici
> > >Sent: Monday, May 18, 2009 05:00 PM
> > >To: Asterisk Users Mailing List - Non-Commercial Discussion
> > >Subject: Re: [asterisk-users] Step-by-Step Asterisk and MeetMe Help
> > >
> > >
> > >This is your problem -- check the compile of the zaptel package and
> > >see what happened. It might not compile it if you have a hardware
> > >zaptel crd, otherwise it should have done so.
> >
> > I stopped asterisk.
> >
> > I have no card. From the zaptel directory I ran
> > # make distclean
> > # make clean
> > # ./configure
> > # make menuselect
> > In menuselect I removed all Kernel Modules except for ztdummy
> > # make
> >
> > --------------output of make command --------------
> > [root at localhost zaptel-1.4.12.1]# make
> > make[1]: Entering directory `/usr/src/zaptel-1.4.12.1'
> > make -C /usr/src/linux-2.4 ARCH=i386
>SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel HOTPLUG_FIRMWARE=yes
>KBUILD_OBJ_M="zaptel.o ztdummy.
> o " modules
> > make[2]: Entering directory
>`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> > CC [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.o
> > /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.c: In function
>`__zt_receive_chunk':
> > /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.c:6703:
>warning: 'res' might be used uninitialized in this function
> > LD [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel.o
> > CC [M] /usr/src/zaptel-1.4.12.1/kernel/ztdummy.o
> > Building modules, stage 2.
> > MODPOST
> > CC /usr/src/zaptel-1.4.12.1/kernel/zaptel.mod.o
> > LD [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel.ko
> > CC /usr/src/zaptel-1.4.12.1/kernel/ztdummy.mod.o
> > LD [M] /usr/src/zaptel-1.4.12.1/kernel/ztdummy.ko
> > make[2]: Leaving directory
>`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> > gcc -c -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>zonedata.lo
> zonedata.c
> > gcc -c -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>tonezone.lo
> tonezone.c
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\"
>-shared -Wl,-sonam
> e,libtonezone.so.1.0 -o libtonezone.so
>zonedata.lo tonezone.lo -lm
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c
>-o zonedata.o
> zonedata.c
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c
>-o tonezone.o
> tonezone.c
> > ar rcs libtonezone.a zonedata.o tonezone.o
> > ranlib libtonezone.a
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>fxotune.o -c fx
> otune.c
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>fxotune fxotune
> .o -lm
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>ztcfg.o -c ztcf
> g.c
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>ztcfg ztcfg.o l
> ibtonezone.a -lm
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>ztmonitor.o -c
> ztmonitor.c
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>ztmonitor ztmon
> itor.o
> > gcc -o ztspeed.o -c ztspeed.c
> > gcc -o ztspeed ztspeed.o
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>zttest.o -c ztt
> est.c
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>zttest zttest.o
>
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>ztscan.o -c zts
> can.c
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>ztscan ztscan.o
>
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>zttool.o -c zt
> tool.c
> > gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE
>-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o
>zttool zttool.o
> -lnewt
> > make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1'
> > ----------------- end output of make command -------------------
> >
> >
> > # make install
> > -------------- output of make install command --------------
> > [root at localhost zaptel-1.4.12.1]# make install
> > make[1]: Entering directory `/usr/src/zaptel-1.4.12.1'
> > make -C /usr/src/linux-2.4 ARCH=i386
>SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel HOTPLUG_FIRMWARE=yes
>KBUILD_OBJ_M="zaptel.o ztdummy.o " modules
> > make[2]: Entering directory
>`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> > Building modules, stage 2.
> > MODPOST
> > make[2]: Leaving directory
>`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> > make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1'
> > install -d /etc/udev/rules.d
> > build_tools/genudevrules > /etc/udev/rules.d/zaptel.rules
> > build_tools/uninstall-modules dahdi 2.6.9-78.ELsmp
> > make -C /usr/src/linux-2.4 ARCH=i386
>SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel HOTPLUG_FIRMWARE=yes
>KBUILD_OBJ_M="zaptel.o ztdummy.o " INSTALL_MOD_PATH=
>INSTALL_MOD_DIR=misc modules_install
> > make[1]: Entering directory
>`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> > INSTALL /usr/src/zaptel-1.4.12.1/kernel/zaptel.ko
> > INSTALL /usr/src/zaptel-1.4.12.1/kernel/ztdummy.ko
> > make[1]: Leaving directory
>`/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> > [ `id -u` = 0 ] && /sbin/depmod -a 2.6.9-78.ELsmp || :
> > install -d /sbin
> > install fxotune ztcfg ztmonitor ztspeed zttest ztscan zttool /sbin/
> > install -d /usr/share/man/man8
> > install -m 644 doc/fxotune.8 doc/ztcfg.8 doc/ztmonitor.8
>doc/ztspeed.8 doc/zttest.8 doc/ztscan.8 doc/zttool.8
>/usr/share/man/man8/
> > /usr/bin/install -c -D -m 755 libtonezone.a /usr/lib/libtonezone.a
> > /usr/bin/install -c -D -m 755 libtonezone.so
>/usr/lib/libtonezone.so.1.0
> > if [ `id -u` = 0 ]; then \
> > /sbin/ldconfig || : ;\
> > fi
> > rm -f /usr/liblibtonezone.so
> > /bin/ln -sf libtonezone.so.1.0 \
> > /usr/lib/libtonezone.so.1
> > /bin/ln -sf libtonezone.so.1.0 \
> > /usr/lib/libtonezone.so
> > /sbin/restorecon -v /usr/lib/libtonezone.so
> > /usr/bin/install -c -D -m 644 kernel/zaptel.h
>/usr/include/zaptel/zaptel.h
> > /usr/bin/install -c -D -m 644 tonezone.h
>/usr/include/zaptel/tonezone.h
> > make -C firmware hotplug-install DESTDIR= HOTPLUG_FIRMWARE=yes
> > make[1]: Entering directory `/usr/src/zaptel-1.4.12.1/firmware'
> > make[1]: Nothing to be done for `hotplug-install'.
> > make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1/firmware'
> > ###################################################
> > ###
> > ### Zaptel installed successfully.
> > ### If you have not done so before, install init scripts with:
> > ###
> > ### make config
> > ###
> > ###################################################
> > [root at localhost zaptel-1.4.12.1]#
> > -------------- end output of make install command --------------
> > # make config
> > -------------- output of make config command --------------
> > [root at localhost zaptel-1.4.12.1]# make config
> > install -D zaptel.init /etc/rc.d/init.d/zaptel
> > install -D ifup-hdlc /etc/sysconfig/network-scripts/ifup-hdlc
> > /sbin/chkconfig --add zaptel
> > Zaptel has been configured.
> >
> > If you have any zaptel hardware it is now recommended to
> > edit /etc/default/zaptel or /etc/sysconfig/zaptel and set there an
> > optimal value for the variable MODULES .
> >
> > I think that the zaptel hardware you have on your system is:
> > [root at localhost zaptel-1.4.12.1]#
> > -------------- end output of make config command --------------
> >
> > I rebooted the server with command:
> > #init 6
> >
> > Server reboots and I see these same errors:
> > > May 18 14:46:59 localhost modprobe: FATAL: Module zaptel
>not found.
> > > May 18 14:46:59 localhost zaptel: Loading zaptel
>framework: failed
> > > On boot I also see "Waiting for zap to come
>online...Error: missing /dev/zap!
> >
> >
> > >
> > >on Monday 05/18/2009 Jimmy Ezell(jezell at hmhca.com) wrote
> > > >
> > > > >
> > > > >I would modprobe ztdummy and see what happens and look at
> > >the log and
> > > > >lsmod after you do that.
> > > > >
> > > > >--
> > > > >Your life is like a penny. You're going to lose it. The
> > >question is:
> > > > >How do
> > > > >you spend it?
> > > > >
> > > > > John Covici
> > > > > covici at ccs.covici.com
> > > >
> > > > John,
> > > >
> > > > modprobe comes back right away with ztdummy not found
> > > >
> > > > [root at localhost zaptel-1.4.12.1]# modprobe ztdummy
> > > > FATAL: Module ztdummy not found.
> > > >
> > > > >
> > > >
> > > > _______________________________________________
> > > > -- Bandwidth and Colocation Provided by
> > >http://www.api-digital.com --
> > > >
> > > > asterisk-users mailing
> > >list
> > > > To UNSUBSCRIBE or update options visit:
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > >--
> > >Your life is like a penny. You're going to lose it. The
>question is:
> > >How do
> > >you spend it?
> > >
> > > John Covici
> > > covici at ccs.covici.com
> > >
> > >_______________________________________________
> > >-- Bandwidth and Colocation Provided by
>http://www.api-digital.com --
> > >
> > >asterisk-users mailing
>list
> > >To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > -- Bandwidth and Colocation Provided by
>http://www.api-digital.com --
> >
> > asterisk-users mailing
>list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
>--
>Your life is like a penny. You're going to lose it. The question is:
>How do
>you spend it?
>
> John Covici
> covici at ccs.covici.com
>
>_______________________________________________
>-- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
>asterisk-users mailing list
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list