[asterisk-users] Step-by-Step Asterisk and MeetMe Help
John covici
covici at ccs.covici.com
Mon May 18 20:01:12 CDT 2009
You should not have removed all kernel modules, at least zaptel, but I
keep them anyway.
on Monday 05/18/2009 Jimmy Ezell(jezell at hmhca.com) wrote
>
> >From: asterisk-users-bounces at lists.digium.com
> >[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of
> >John covici
> >Sent: Monday, May 18, 2009 05:00 PM
> >To: Asterisk Users Mailing List - Non-Commercial Discussion
> >Subject: Re: [asterisk-users] Step-by-Step Asterisk and MeetMe Help
> >
> >
> >This is your problem -- check the compile of the zaptel package and
> >see what happened. It might not compile it if you have a hardware
> >zaptel crd, otherwise it should have done so.
>
> I stopped asterisk.
>
> I have no card. From the zaptel directory I ran
> # make distclean
> # make clean
> # ./configure
> # make menuselect
> In menuselect I removed all Kernel Modules except for ztdummy
> # make
>
> --------------output of make command --------------
> [root at localhost zaptel-1.4.12.1]# make
> make[1]: Entering directory `/usr/src/zaptel-1.4.12.1'
> make -C /usr/src/linux-2.4 ARCH=i386 SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="zaptel.o ztdummy. o " modules
> make[2]: Entering directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> CC [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.o
> /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.c: In function `__zt_receive_chunk':
> /usr/src/zaptel-1.4.12.1/kernel/zaptel-base.c:6703: warning: 'res' might be used uninitialized in this function
> LD [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel.o
> CC [M] /usr/src/zaptel-1.4.12.1/kernel/ztdummy.o
> Building modules, stage 2.
> MODPOST
> CC /usr/src/zaptel-1.4.12.1/kernel/zaptel.mod.o
> LD [M] /usr/src/zaptel-1.4.12.1/kernel/zaptel.ko
> CC /usr/src/zaptel-1.4.12.1/kernel/ztdummy.mod.o
> LD [M] /usr/src/zaptel-1.4.12.1/kernel/ztdummy.ko
> make[2]: Leaving directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> gcc -c -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zonedata.lo zonedata.c
> gcc -c -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o tonezone.lo tonezone.c
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -shared -Wl,-sonam e,libtonezone.so.1.0 -o libtonezone.so zonedata.lo tonezone.lo -lm
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o zonedata.o zonedata.c
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -c -o tonezone.o tonezone.c
> ar rcs libtonezone.a zonedata.o tonezone.o
> ranlib libtonezone.a
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o fxotune.o -c fx otune.c
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o fxotune fxotune .o -lm
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztcfg.o -c ztcf g.c
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztcfg ztcfg.o l ibtonezone.a -lm
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztmonitor.o -c ztmonitor.c
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztmonitor ztmon itor.o
> gcc -o ztspeed.o -c ztspeed.c
> gcc -o ztspeed ztspeed.o
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttest.o -c ztt est.c
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttest zttest.o
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztscan.o -c zts can.c
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o ztscan ztscan.o
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttool.o -c zt tool.c
> gcc -g -O2 -I. -g -fPIC -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\"/etc/zaptel.conf\" -o zttool zttool.o -lnewt
> make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1'
> ----------------- end output of make command -------------------
>
>
> # make install
> -------------- output of make install command --------------
> [root at localhost zaptel-1.4.12.1]# make install
> make[1]: Entering directory `/usr/src/zaptel-1.4.12.1'
> make -C /usr/src/linux-2.4 ARCH=i386 SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="zaptel.o ztdummy.o " modules
> make[2]: Entering directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> Building modules, stage 2.
> MODPOST
> make[2]: Leaving directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1'
> install -d /etc/udev/rules.d
> build_tools/genudevrules > /etc/udev/rules.d/zaptel.rules
> build_tools/uninstall-modules dahdi 2.6.9-78.ELsmp
> make -C /usr/src/linux-2.4 ARCH=i386 SUBDIRS=/usr/src/zaptel-1.4.12.1/kernel HOTPLUG_FIRMWARE=yes KBUILD_OBJ_M="zaptel.o ztdummy.o " INSTALL_MOD_PATH= INSTALL_MOD_DIR=misc modules_install
> make[1]: Entering directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> INSTALL /usr/src/zaptel-1.4.12.1/kernel/zaptel.ko
> INSTALL /usr/src/zaptel-1.4.12.1/kernel/ztdummy.ko
> make[1]: Leaving directory `/usr/src/kernels/2.6.9-78.0.13.EL-smp-i686'
> [ `id -u` = 0 ] && /sbin/depmod -a 2.6.9-78.ELsmp || :
> install -d /sbin
> install fxotune ztcfg ztmonitor ztspeed zttest ztscan zttool /sbin/
> install -d /usr/share/man/man8
> install -m 644 doc/fxotune.8 doc/ztcfg.8 doc/ztmonitor.8 doc/ztspeed.8 doc/zttest.8 doc/ztscan.8 doc/zttool.8 /usr/share/man/man8/
> /usr/bin/install -c -D -m 755 libtonezone.a /usr/lib/libtonezone.a
> /usr/bin/install -c -D -m 755 libtonezone.so /usr/lib/libtonezone.so.1.0
> if [ `id -u` = 0 ]; then \
> /sbin/ldconfig || : ;\
> fi
> rm -f /usr/liblibtonezone.so
> /bin/ln -sf libtonezone.so.1.0 \
> /usr/lib/libtonezone.so.1
> /bin/ln -sf libtonezone.so.1.0 \
> /usr/lib/libtonezone.so
> /sbin/restorecon -v /usr/lib/libtonezone.so
> /usr/bin/install -c -D -m 644 kernel/zaptel.h /usr/include/zaptel/zaptel.h
> /usr/bin/install -c -D -m 644 tonezone.h /usr/include/zaptel/tonezone.h
> make -C firmware hotplug-install DESTDIR= HOTPLUG_FIRMWARE=yes
> make[1]: Entering directory `/usr/src/zaptel-1.4.12.1/firmware'
> make[1]: Nothing to be done for `hotplug-install'.
> make[1]: Leaving directory `/usr/src/zaptel-1.4.12.1/firmware'
> ###################################################
> ###
> ### Zaptel installed successfully.
> ### If you have not done so before, install init scripts with:
> ###
> ### make config
> ###
> ###################################################
> [root at localhost zaptel-1.4.12.1]#
> -------------- end output of make install command --------------
> # make config
> -------------- output of make config command --------------
> [root at localhost zaptel-1.4.12.1]# make config
> install -D zaptel.init /etc/rc.d/init.d/zaptel
> install -D ifup-hdlc /etc/sysconfig/network-scripts/ifup-hdlc
> /sbin/chkconfig --add zaptel
> Zaptel has been configured.
>
> If you have any zaptel hardware it is now recommended to
> edit /etc/default/zaptel or /etc/sysconfig/zaptel and set there an
> optimal value for the variable MODULES .
>
> I think that the zaptel hardware you have on your system is:
> [root at localhost zaptel-1.4.12.1]#
> -------------- end output of make config command --------------
>
> I rebooted the server with command:
> #init 6
>
> Server reboots and I see these same errors:
> > May 18 14:46:59 localhost modprobe: FATAL: Module zaptel not found.
> > May 18 14:46:59 localhost zaptel: Loading zaptel framework: failed
> > On boot I also see "Waiting for zap to come online...Error: missing /dev/zap!
>
>
> >
> >on Monday 05/18/2009 Jimmy Ezell(jezell at hmhca.com) wrote
> > >
> > > >
> > > >I would modprobe ztdummy and see what happens and look at
> >the log and
> > > >lsmod after you do that.
> > > >
> > > >--
> > > >Your life is like a penny. You're going to lose it. The
> >question is:
> > > >How do
> > > >you spend it?
> > > >
> > > > John Covici
> > > > covici at ccs.covici.com
> > >
> > > John,
> > >
> > > modprobe comes back right away with ztdummy not found
> > >
> > > [root at localhost zaptel-1.4.12.1]# modprobe ztdummy
> > > FATAL: Module ztdummy not found.
> > >
> > > >
> > >
> > > _______________________________________________
> > > -- Bandwidth and Colocation Provided by
> >http://www.api-digital.com --
> > >
> > > asterisk-users mailing
> >list
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >--
> >Your life is like a penny. You're going to lose it. The question is:
> >How do
> >you spend it?
> >
> > John Covici
> > covici at ccs.covici.com
> >
> >_______________________________________________
> >-- Bandwidth and Colocation Provided by http://www.api-digital.com --
> >
> >asterisk-users mailing list
> >To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
--
Your life is like a penny. You're going to lose it. The question is:
How do
you spend it?
John Covici
covici at ccs.covici.com
More information about the asterisk-users
mailing list