[asterisk-users] Problem with Free Fax For Asterisk

[Kevin P. Fleming]

Trevor Hammonds wrote:
> I have installed Free Fax For Asterisk 1.6.1_1.0.8 on Asterisk
> SVN-branch-1.6.1-r194876M and am getting a peculiar error message.
> 
> Current scenario, while testing, is to receive an inbound fax call via
> a regular DID and then transfer the call to the internal fax
> extension.  When I do so, I receive the following error message on the
> console, several times:
> 
> WARNING[2895]: chan_sip.c:5369 sip_write: Asked to transmit frame type
> 64, while native formats is 0x4 (ulaw)(4) read/write = 0x40
> (slin)(64)/0x4 (ulaw)(4)

WARNING != ERROR :-)

In spite of that, are there *no* other messages before that which would
indicate a problem setting up a translation path or similar problems?

> Also, the documentation is a little unclear on one issue.  I would
> like to know if this version of FFA (1.6.1_1.0.8) will work with
> Asterisk 1.6.2.

Asterisk 1.6.2 is still in beta, so its APIs are still subject to
change. FFA for Asterisk 1.6.1 *may* work fine with it, or may not. Once
Asterisk 1.6.2 reaches the release candidate state, if new FFA modules
are required then they will be produced and the FFA download selector
page will be updated to reflect that.

-- 
Kevin P. Fleming
Digium, Inc. | Director of Software Technologies
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
skype: kpfleming | jabber: kpfleming at digium.com
Check us out at www.digium.com & www.asterisk.org