[asterisk-users] meetme dies looking for conf-getconfno

[Danny Nicholas]

Gsm is what I've been using.  The problem could be a "duplication" problem -
if there are 2 or 3 foo.* in the v/l/a/s dir, Asterisk "flakes" trying to
process them all.  I've had that happen with a foo.wav and foo.gsm in the
same dir.  Also check permissions.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of sean darcy
Sent: Friday, May 15, 2009 1:01 PM
To: asterisk-users at lists.digium.com
Subject: Re: [asterisk-users] meetme dies looking for conf-getconfno

Danny Nicholas wrote:
> You "lost" conf-getconfno.gsm . Asterisk is trying to play that file to
let
> you pick a conference number to use.  It goes in /var/lib/asterisk/sounds.
> Grep for it.
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of sean darcy
> Sent: Friday, May 15, 2009 12:39 PM
> To: asterisk-users at lists.digium.com
> Subject: [asterisk-users] meetme dies looking for conf-getconfno
> 
> With 1.6.1, I'm trying to set up a test of meetme for creating dynamic 
> conferences.
> 
> cat meetme.conf
> [rooms]
> conf => 600
> 
> extensions.conf:
> 
> [meetme]
> exten => 2663,1,MeetMe(,D)
> exten => 2663,n,Hangup()
> 
> exten => 2666,1,MeetMe()
> exten => 2666,n,Hangup()
> 
> 
> What I'm expecting is to dial 2663, get a conference room number ( 600, 
> I suppose since it's the only room ), and set a PIN.
> 
> Then I'd dial 2666 enter the conference room number and the PIN, and be 
> put in conference.
> 
> But here's what happens when I dial 2663:
> 
>     -- Starting simple switch on 'DAHDI/1-1'
>      -- Executing [2663 at internal:1] MeetMe("DAHDI/1-1", ",D") in new stack
> [2009-05-15 13:21:19] WARNING[2061]: file.c:641 ast_openstream_full: 
> File conf-getconfno does not exist in any format
> [2009-05-15 13:21:19] WARNING[2061]: file.c:924 ast_streamfile: Unable 
> to open conf-getconfno (format 0x4 (ulaw)): No such file or directory
>    == Spawn extension (internal, 2663, 1) exited non-zero on 'DAHDI/1-1'
>      -- Hungup 'DAHDI/1-1'
> 
> 
> conf-getconfno does exist:
> 
> ls -l /var/lib/asterisk/sounds/en/conf-getconf*
> -rw-r--r--. 1 root root 25211 2009-03-26 14:42 
> /var/lib/asterisk/sounds/en/conf-getconfno.ulaw
> -rw-r--r--. 1 root root 50466 2009-03-26 14:42 
> /var/lib/asterisk/sounds/en/conf-getconfno.wav
> 
> Any help appreciated.
> 
> sean
> 

Will do, but why gsm? Nobody's using gsm, and it looks like it's seeking 
ulaw ( which is installed).

sean


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users