[asterisk-users] DAHDI [USERUSERINFO]

[Tony Mountifield]

In article <cf554c8c0905150305r61477984v99b23d76156993e0 at mail.gmail.com>,
DHAVAL INDRODIYA <dhaval.it01034 at gmail.com> wrote:
> hi Tony,
> 
> Thanks for your reply
> 
> I tried with the same but it dont work for me and I used DAHDI channel and
> PRI following are
> 
> mine chan_dahdi.conf setting
> 
> [channels]
> language=en
> context=from-pstn
> switchtype=euroisdn
> pridialplan=local
> prilocaldialplan=local
> callerid=asreceived
> signalling=pri_cpe
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> resetinterval=never
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
> immediate=no
> group=0
> channel => 1-15
> channel => 17-31

Looks ok to me. Are you testing this using PSTN calls? I don't know
whether all telcos will propagate the User-User Information.

You should first test it directly between two Asterisk boxes, or two ports
on a single box, using an E1 crossover cable. Once you know it is working
in that setup, you can try it through the PSTN.

Use the "pri debug span" command to turn on PRI debugging. This will show
you the protocol elements being sent and received, and you can check
whether your user-user elements are included.

Regards
Tony
-- 
Tony Mountifield
Work: tony at softins.co.uk - http://www.softins.co.uk
Play: tony at mountifield.org - http://tony.mountifield.org