[asterisk-users] Sangoma a104d and channel banks

[Jim Dickenson]

From: Grygoriy Dobrovolskyy <megahohol at gmail.com>
Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Date: Thu, 7 May 2009 15:21:03 +0200
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Subject: Re: [asterisk-users] Sangoma a104d and channel banks



2009/5/7 Jim Dickenson <dickenson at cfmc.com>
> From: Grygoriy Dobrovolskyy <megahohol at gmail.com>
> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion
> <asterisk-users at lists.digium.com>
> Date: Thu, 7 May 2009 12:20:07 +0200
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> <asterisk-users at lists.digium.com>
> Subject: Re: [asterisk-users] Sangoma a104d and channel banks
> 
> 
> 
> 
> 2009/5/7 Jim Dickenson <dickenson at cfmc.com>
>> I have * 1.6.0.9 with dahdi-linux 2.1.0.4, dahdi-tools 2.1.0.2, libpri
>> 1.4.10 and wanpipe-3.4.1 running on CentOS 5.3 64bit.
>> 
>> I have 2 ports of the a104d configured for use with PRI lines and 2 ports
>> configured for use with Adtran Total Access 850 channel banks. The channel
>> banks have 6 four port FXS cards in them.
>> 
>> The PRI lines work as expected.
>> 
>> I can call a phone connected to the channel bank and this works as expected.
>> 
>> If I pick up the phone connected to the channel bank and dial a digit I
>> immediately get a fast busy tone. The exceptions is that if I dial
>> *7<anything> then I can dial these three keys. Nothing of much interest
>> shows on the * console other then when I hang up the phone this event is
>> reported.
>> 
>> If while talking on the phone when someone calls me, I press a key on the
>> phone connected to the channel bank, the person called hears a faint pop and
>> then the pressed dtmf tone.
>> 
>> Any ideas as to what might cause this behavior?
>> 
>> Thanks for any ideas!
>> --
>> Jim Dickenson
>> mailto:dickenson at cfmc.com
>> 
>> CfMC
>> http://www.cfmc.com/
> 
> Look if your channel bank dont have any fancy dialplan configured.
> 
> 
> 
> The context the channel bank phones are in includes one context that only has
> extensions 111, 222, 333, 444 and 555.

I am not taling about the dialplan inside asterisk, i dont know if you
channel bank is managable or not, like for example aastra phones has their
dialplant configured inside teh phone.



Sorry, no the phone is a regular dumb analog phone. The Adtran Total Access
850, as far as I know, has no place to do any dtmf based logic. You just set
various pacing and signaling options.

-- 
Jim Dickenson
mailto:dickenson at cfmc.com

CfMC
http://www.cfmc.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090507/c2e8fff7/attachment.htm