[asterisk-users] Sangoma a104d and channel banks

[Jim Dickenson]

From: Grygoriy Dobrovolskyy <megahohol at gmail.com>
Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Date: Thu, 7 May 2009 12:20:07 +0200
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Subject: Re: [asterisk-users] Sangoma a104d and channel banks



2009/5/7 Jim Dickenson <dickenson at cfmc.com>
> I have * 1.6.0.9 with dahdi-linux 2.1.0.4, dahdi-tools 2.1.0.2, libpri
> 1.4.10 and wanpipe-3.4.1 running on CentOS 5.3 64bit.
> 
> I have 2 ports of the a104d configured for use with PRI lines and 2 ports
> configured for use with Adtran Total Access 850 channel banks. The channel
> banks have 6 four port FXS cards in them.
> 
> The PRI lines work as expected.
> 
> I can call a phone connected to the channel bank and this works as expected.
> 
> If I pick up the phone connected to the channel bank and dial a digit I
> immediately get a fast busy tone. The exceptions is that if I dial
> *7<anything> then I can dial these three keys. Nothing of much interest
> shows on the * console other then when I hang up the phone this event is
> reported.
> 
> If while talking on the phone when someone calls me, I press a key on the
> phone connected to the channel bank, the person called hears a faint pop and
> then the pressed dtmf tone.
> 
> Any ideas as to what might cause this behavior?
> 
> Thanks for any ideas!
> --
> Jim Dickenson
> mailto:dickenson at cfmc.com
> 
> CfMC
> http://www.cfmc.com/

Look if your channel bank dont have any fancy dialplan configured.



The context the channel bank phones are in includes one context that only
has extensions 111, 222, 333, 444 and 555.
-- 
Jim Dickenson
mailto:dickenson at cfmc.com

CfMC
http://www.cfmc.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090507/fa3bacfc/attachment.htm