[asterisk-users] Polycom Dialplan Digitmaps

[John Millican]

Justin Phelps wrote:
> I'm replacing a SoundPoint IP 600 with a SoundPoint IP 650.
> 
> I attempted to simply reuse the existing config files for the old phone 
> on the new phone, but the new phone would lock up on the 4th digit when 
> attempted to dial out certain numbers. So, I downloaded the newest 
> firmware and config templates from Polycom, and attempted to migrate the 
> settings. Seems I'm missing something from the old configs though, and I 
> need some help figuring out why these expressions lock up the new phone.
> 
> Old Configs
> <digitmap 
> dialplan.digitmap="[2-9]11|[*]xx|891xxx|[1-7]xxx|8[0-46-8]xx|8500|851xxx|9,1[2-9]xxxxxxxxx|9,xxxxxxxT" 
                                           ^^^^^^^
> dialplan.digitmap.timeOut="3"/>
> 
> Template from Polycom
> <digitmap 
> dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT" 
> dialplan.digitmap.timeOut="3|3|3|3|3|3"/>
> 
> Anyone have any insight or suggestions on this issue, and on upgrading 
> Polycom configs in general?
Do those certain numbers start with a 1 through 7?  You may have to put
a T in the above marked section and add to the series of
dialplan.digitmap.timeOut.
Just to keep myself from getting confused i usually put in the full
string of time outs, needed or not.
-- 
JohnM