[asterisk-users] [UK SPECIFIC] DAHDI and a OpenVox Card
--[ UxBoD ]--
uxbod at splatnix.net
Fri May 1 01:16:19 CDT 2009
----- "Tzafrir Cohen" <tzafrir.cohen at xorcom.com> wrote:
> On Mon, Apr 27, 2009 at 07:37:05AM +0100, --[ UxBoD ]-- wrote:
> > Hi,
> >
> > Built a new server at the weekend and install Asterisk 1.6.0.9 and
> > IAX and SIP work great :) The one problem I am having is getting the
> > OpenVox (TDM400 type card) to work. It is successfully identified
> > using WCTDM kernel module and dahdi_scan picks it up just fine.
> > The issue is when I try and setup dahdi_channel.conf as it fails
> > everytime.
>
> What is dahdi_channel.conf ?
>
> What is the output of:
>
> lsdahdi
> asterisk -rx 'dahdi show channels'
>
> > When running asterisk -rvvvv I see the port pick up the ring but the
> > it shows a RED Alarm failure.
>
> RED alarm: nothing connected to the port (applies to FXO as well as to
> digital ports - E1, T1, J1, BRI).
>
>
Sorry for the delay! Okay here is the information requested :-
dahdi_chan.conf
---------------
[channels]
group=0
language=en
context=inbound-dahdi
signalling=fxs_ks
dahdichan => 1
lsdahdi
-------
[root at voip asterisk]# lsdahdi
### Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
1 FXO FXSKS (In use) (SWEC: MG2) RED
2 EMPTY
3 EMPTY
4 EMPTY
[root at voip asterisk]# asterisk -rx 'dahdi show channels'
Chan Extension Context Language MOH Interpret Blocked State
pseudo default default In Service
1 inbound-dahdi en default In Service
Cable is plugged in fine, but when it tries to pick up the call I get :-
[May 1 07:15:03] NOTICE[10601]: chan_dahdi.c:8164 handle_init_event: Alarm cleared on channel 1
[May 1 07:15:04] WARNING[10601]: chan_dahdi.c:4664 handle_alarms: Detected alarm on channel 1: Red Alarm
Would be really nice to get this working and complete my VoIP installation :(
Best Regards,
--
SplatNIX IT Services :: Innovation through collaboration
More information about the asterisk-users
mailing list