[asterisk-users] Queues, SIP channel and "In Use"

[Benoit]

Mark Michelson a écrit :
> Benoit wrote:
>   
>> Hi,
>>
>> I'm a little surprised, up until 1.4.22 my agents where using an IAX
>> channel to ZoIPer Softphone,
>> however since after the upgrade to .22 we experienced a problem with
>> hangup failure between zoiper
>>  and asterisk (look like bug http://bugs.digium.com/view.php?id=13184) i
>> made them switch to SIP
>> instead.
>>
>> Weird thing is that the 'Not In Use' warning message keep showing
>> (WARNING[1863]: app_queue.c:3136 try_calling: The device state of this
>> queue member, Agent/136, is still 'Not in Use' when it probably should
>> not be! Please check UPGRADE.txt for correct configuration settings.)
>> However, when i look at the queue a few sec after the Agent is marked
>> 'in use' which wasn't the case with IAX iirc
>>
>> Agent are defined using a Local channel, but we used the '/n' flag to
>> passthru the status:
>>         Agent/136 (Local/136 at queues/n) ..
>>
>> As for the SIP peer definition i have the limitonpeer=yes in the general
>> section and all peers are templated based on this:
>>
>> [poste](!)
>> type=friend
>> host=dynamic
>> qualify=yes
>> call-limit=6
>>
>>
>> Is their something more in can do to avoid the warning ?
>>     
>
> I believe the use of the Local channel is what is causing the warning to appear. 
> The problem is that the device state is not updated until after app_queue checks 
> to see if it should display that warning. This has been brought up before, but 
> since it doesn't actually adversely affect the operation of the queue, not much 
> has been done. The worst you have to worry about is that warning. If you find 
> the warning to be annoying, the best I can offer you is to either not log 
> warnings (a bad idea, imho) or just remove that line of code from the source.
>
> Mark Michelson
>   
No it's fine for me, i was just wondering if i missed something
thanks