[asterisk-users] X100P FXO PCI card not receiving calls
srinivas Antarvedi
srinivas.antarvedi at gmail.com
Mon Aug 10 01:16:35 CDT 2009
Hello users,
i have recently purchased Authentica x100p Fxo card for asterisk 1.4
i have following settings
# /etc/zaptel.conf
fxsks=1
loadzone=in
defaultzone=in
# /etc/asterisk/zapata.conf
[channels]
context=from-pstn
usecallerid=no
hidecallerid=yes
immediate=no
signalling=fxs_ks
echocancel=yes
channel => 1
#/etc/asterisk/extensions.conf
[from-pstn]
exten => s,1,Answer()
exten => s,n,Playback(vm-intro)
exten => s,n,Hangup()
# lspci -vv
11:00.0 Communication controller: Motorola Wildcard X100P
Subsystem: Efar Microsystems: Unknown device 0001
Flags: bus master, medium devsel, latency 32, IRQ 193
I/O ports at 2000 [size=256]
Memory at ed100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
# cat /proc/interrupts
CPU0 CPU1
0: 921447 931323 IO-APIC-edge timer
1: 5 5 IO-APIC-edge i8042
8: 0 1 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 34 33 IO-APIC-edge i8042
14: 140339 90649 IO-APIC-edge ide0
15: 0 0 IO-APIC-edge libata
169: 38 25 IO-APIC-level ehci_hcd, uhci_hcd, uhci_hcd
177: 0 0 IO-APIC-level uhci_hcd, uhci_hcd
185: 9688 9482 IO-APIC-level libata, ehci_hcd, uhci_hcd,
uhci_hcd
193: 116 36 IO-APIC-level wcfxo
209: 15304 0 PCI-MSI eth0
NMI: 1 0
LOC: 1844122 1843838
ERR: 0
MIS: 0
#cat /proc/zaptel/1
Span 1: WCFXO/0 "Wildcard X100P Board 1" (MASTER)
1 WCFXO/0/0 FXSKS (In use)
i am unable to make incoming calls route to the asterisk.
i didnt see anything in my asterisk CLI.
can anybody advise??
Thanks in advance
Srinivas Antarvedi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090810/08f5a4e7/attachment.htm
More information about the asterisk-users
mailing list