[asterisk-users] Linksys SPA922

[robert boardman]

Hi

the asterisk version is 1.4.21.2

Here is the CLI

    -- Executing [s at incomming:1] Set("Zap/4-1",
"DB(lastcaller/zap4)=01942876818") in new stack
    -- Executing [s at incomming:2] GotoIf("Zap/4-1", "0?s-spoof|1:") in new
stack
    -- Executing [s at incomming:3] Ringing("Zap/4-1", "") in new stack
    -- Executing [s at incomming:4] Set("Zap/4-1", "CDR(accountcode)=s") in new
stack
    -- Executing [s at incomming:5] Dial("Zap/4-1", "SIP/105|20|tT") in new
stack
    -- Called 105


Sip.conf ( with somethings changed)
[gerneral]
externhost=a.host.to.setup.com
localnet=10.1.1.0/255.255.255.0
nat=yes


[105]
callerid=105
type=friend
username=105
host=dynamic
context=dialednum
secret=red
dtmfmode=rfc2833
disallow=all
allow=alaw
insecure=very
;mailbox=105 at homR
qualify=no
nat=yes


2009/8/7 Danny Nicholas <danny at debsinc.com>

>  Show us your CLI output.  I suspect that you’re not getting a bridge
> and/or you’re timing out.   Also sip.conf and user.conf would be helpful as
> well as Asterisk release.
>
>
>  ------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com [mailto:
> asterisk-users-bounces at lists.digium.com] *On Behalf Of *robert boardman
> *Sent:* Friday, August 07, 2009 9:01 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [asterisk-users] Linksys SPA922
>
>
>
>
> Nearly got an SPA922 phone working behind a NAT,
>
> the phone registers, and I can dial out and have two way speech,
>
> on an incoming call the SPA922 rings
>
> I answer and the SPA922 shows "Anwsering" but never does and the far end
> continues ringing until the voicemail answers,
>
> this then show as a disconnected call on the SPA922
>
> I'm on the lastest firmware 6.1.5(a)
>
> Thanks in advance for your help
>
> Robb
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2009 - October 13 - 15 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090807/335899a1/attachment-0001.htm