[asterisk-users] Linksys SPA922

[Danny Nicholas]

Show us your CLI output.  I suspect that you're not getting a bridge and/or
you're timing out.   Also sip.conf and user.conf would be helpful as well as
Asterisk release.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of robert
boardman
Sent: Friday, August 07, 2009 9:01 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Linksys SPA922

 


Nearly got an SPA922 phone working behind a NAT,

the phone registers, and I can dial out and have two way speech, 

on an incoming call the SPA922 rings

I answer and the SPA922 shows "Anwsering" but never does and the far end
continues ringing until the voicemail answers, 

this then show as a disconnected call on the SPA922

I'm on the lastest firmware 6.1.5(a)

Thanks in advance for your help
 
Robb

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090807/936eae4a/attachment.htm