[asterisk-users] IAX IP Phone - PAP2Ts

[Jeff LaCoursiere]

On Fri, 17 Apr 2009, bilal ghayyad wrote:

>
> Dear Jeff;
>
> PAP2Ts support IAX? And support G729 codec? And it support ddns (or dns) 
> to be used instead of the IP Address?
>
> Regards
> Bilal


Hi Bilal,

No, the PAP2Ts do not support IAX.  They do support G.729a and DNS 
however.

Cheers,

j

>
> --- On Mon, 1/19/09, Jeff LaCoursiere <jeff at jeff.net> wrote:
>
>> From: Jeff LaCoursiere <jeff at jeff.net>
>> Subject: Re: [asterisk-users] IAX IP Phone
>> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
>> Cc: bilmar_gh at yahoo.com
>> Date: Monday, January 19, 2009, 12:58 PM
>> On Mon, 19 Jan 2009, Joseph wrote:
>>
>>> On Mon, 19 Jan 2009, bilal ghayyad wrote:
>>>
>>>> Hi All;
>>>>
>>>> Anyone knows an IAX IP Phone works fine and
>> tested?
>>>>
>>>> Does polycom support IAX IP Phone?
>>>>
>>>> Regards
>>>> Bilal
>>>
>>> How about IAX2 adapter from digium?
>>> I've been uing it and it works very well.
>>>
>>
>> Wow, that has NOT been my experience, though it has been a
>> few years (2005) since I used them.  The ones I purchased
>> were first of all expensive.  They overheated and froze up
>> often.  Only a single port.  No dual ethernet option.
>> Provisioning is a PITA.  Codec support was minimal. I
>> thought at the time that being IAX I wouldn't have to
>> worry about NAT issues and that was worth the extra
>> difficulties, but I have been using Linksys PAP2Ts ever
>> since and never looked back.  And it has been over a year
>> since I had any NAT issue to deal with, though have now
>> installed them in hundreds of different configurations.
>>
>> Perhaps these things have been rectified since...
>>
>> j
>
>
>
>