[asterisk-users] IAX IP Phone - PAP2Ts

[bilal ghayyad]

Dear Jeff;

PAP2Ts support IAX? And support G729 codec? And it support ddns (or dns) to be used instead of the IP Address?

Regards
Bilal

--- On Mon, 1/19/09, Jeff LaCoursiere <jeff at jeff.net> wrote:

> From: Jeff LaCoursiere <jeff at jeff.net>
> Subject: Re: [asterisk-users] IAX IP Phone
> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
> Cc: bilmar_gh at yahoo.com
> Date: Monday, January 19, 2009, 12:58 PM
> On Mon, 19 Jan 2009, Joseph wrote:
> 
> > On Mon, 19 Jan 2009, bilal ghayyad wrote:
> > 
> >> Hi All;
> >> 
> >> Anyone knows an IAX IP Phone works fine and
> tested?
> >> 
> >> Does polycom support IAX IP Phone?
> >> 
> >> Regards
> >> Bilal
> > 
> > How about IAX2 adapter from digium?
> > I've been uing it and it works very well.
> > 
> 
> Wow, that has NOT been my experience, though it has been a
> few years (2005) since I used them.  The ones I purchased
> were first of all expensive.  They overheated and froze up
> often.  Only a single port.  No dual ethernet option. 
> Provisioning is a PITA.  Codec support was minimal. I
> thought at the time that being IAX I wouldn't have to
> worry about NAT issues and that was worth the extra
> difficulties, but I have been using Linksys PAP2Ts ever
> since and never looked back.  And it has been over a year
> since I had any NAT issue to deal with, though have now
> installed them in hundreds of different configurations.
> 
> Perhaps these things have been rectified since...
> 
> j