[asterisk-users] [Closed] no ringtone - just silence/bridging ofexternal calls

[alex.mosburger at orange-ftgroup.com]

Hi!

I used a work around to the problem.
I added a Playback(silence/1) quite after the Answer() and now everything is working fine again.

100, 1, Answer()
100, 2, Playback(silence/1)
100, 3, Dial(SIP/XX,,r)

Hope this helps,
Alex
 
Alex Mosburger

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jean-Michel Hiver
Sent: Montag, 30. März 2009 16:51
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] no ringtone - just silence/bridging ofexternal calls

Hello

For the ringtone try  progressinband=yes in sip.conf.

I don't think you can bridge & do a ringback at the same time, why not
proxy the RTP and send the ringback yourself using the 'm' modifier?

Cheers
Jean-Michel.


2009/3/30, alex.mosburger at orange-ftgroup.com
<alex.mosburger at orange-ftgroup.com>:
>
>  Hi Community!
>
>  If this issue was already topic, please excuse or delete my request...
>
>  Topic 1 "no ringtone":
>  I configured a SIP registration with my SIP provider (SIPCall).
>  Everything works fine except the ring tone for the caller. The caller
>  hears silence until the called party takes up the phone.
>
>  I used the DIAL command with the r and R option but no luck... :(
>  Has anybody the same problem than me and a resolution for it?
>
>  ---------
>
>  Topic 2 "external bridging":
>  The prior approach was to bridge to external calls. An external SIP
>  number terminates and will be re-routed back to a mobile phone number.
>  The session was first packet2packet switched, which did not work. After
>  setting reinvite=yes, the bridge works. Now I added 2 internal
>  extensions to the mobile phone number in the DIAL command --> did not
>  work (mobile phone rings but no communication possible; just silence).
>
>  Topology:
>  SIP Provider --> Asterisk --> SIP Provider --> Mobile phone
>                         /- ext 10
>                         /- ext 20
>
>
>  The DIAL command was:
>  Dial(SIP/06544564564 at sipcall.at&SIP/10&SIP/20,,r)
>
>  The aim is that all extensions and the mobile rings and the first pick
>  up takes the call. During call setup music on hold would be good...
>
>  It shows no errors in the debug of the CLI.
>
>  I would appreciate if somebody could help me.
>
>  Thanks,
>  Alex
>
>
>  *********************************
>  This message and any attachments (the "message") are confidential and intended solely for the addressees.
>  Any unauthorised use or dissemination is prohibited.
>  Messages are susceptible to alteration.
>  France Telecom Group shall not be liable for the message if altered, changed or falsified.
>  If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
>  ********************************
>
>  _______________________________________________
>  -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
>  asterisk-users mailing list
>  To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>


-- 
Jean-Michel Hiver - Synapse co-founder & CTO
GSM +262 692 828 070

_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

*********************************
This message and any attachments (the "message") are confidential and intended solely for the addressees. 
Any unauthorised use or dissemination is prohibited.
Messages are susceptible to alteration. 
France Telecom Group shall not be liable for the message if altered, changed or falsified.
If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
********************************