[asterisk-users] Cisco Gateway sending call to * without CID Name

[Peder @ NetworkOblivion]

  no ip address
  encapsulation hdlc
  isdn switch-type primary-ni
  isdn incoming-voice voice
  isdn supp-service name calling
  no cdp enable



Sean Dennis wrote:
> What ISDN commands do you have under your PRI serial interface?
> 
> JR Richardson wrote:
>> Hi All,
>>
>> I have a Cisco 2600 PRI gateway being hosted on an Asterisk server.
>> The PRI on the cisco is pointing to a customer legacy PBX, the SIP
>> VoIP side of the cisco is pointing to an Asterisk server (1.2.X).
>>
>> In Asterisk, the SIP peer is setup with callerid="some name"<5551212>
>>
>> In a SIP call from the cisco to asterisk, there is no CID name info in
>> SIP debug, so Asterisk doesn't seem to inject CID name info for that
>> SIP Channel on pass through calls.  Asterisk does have the CID number
>> and account number and user info and all other variable associated
>> with the SIP channel, just no CID name.
>>
>> When I test with another Asterisk server acting as the PRI gateway,
>> the CID name is fine.
>>
>> 1. in the cisco, does anyone know what the command is to set a CID
>> Name for all outbound VoIP calls?
>>
>> 2. is this a bug in Asterisk that will not inject CID name in a
>> channel if it doesn't have CID name coming in first?
>>
>> Thanks.
>>
>> JR
>>   
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>